T
The Daily Insight

Are Kwikset and Schlage deadbolts interchangeable

Author

Sarah Rodriguez

Published Mar 21, 2026

Basically, you cannot re-key the lock from Schlage to Kwikset, but you can change the lock cylinder from Schlage to Kwikset.

Are all deadbolts interchangeable?

Re-keying kits are available for most lock brands but they’re not interchangeable. You must buy a kit for each brand of lock in your home. (If you’re lucky, they’ll all be the same brand!) Each kit will re-key six locks, but you can order extra pins if you need to do more.

Can I put a Kwikset cylinder in a Schlage Lock?

This is the K001-KW-26D-A2, which allows you to install a Kwikset 1176 keyway into a lock which accepts a standard Schlage C cylinder.

Are Schlage deadbolts interchangeable?

Includes Schlage “C” keyway full size interchangeable core. Designed by locksmiths for locksmiths, the B500-Series deadbolt accepts any Schlage cylinders, fits virtually every door you service, enhances lock strength on the jamb side of the door and will change forever the way you look at deadbolts.

Are Schlage and Kwikset the same company?

Before we dive into the comparison, it’s important to understand that Schlage and Kwikset are just brand names and not specific lock models. Both companies, Schlage and Kwikset make many different types of locks, such as residential doorknobs, deadbolts and keypads.

Are there different deadbolt sizes?

In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify.

Are Schlage locks interchangeable?

Schlage interchangeable cores can always be integrated into existing systems with no adverse effect on the key system. IC cylinders are available in two sizes: Full Size Interchangeable Cores (FSIC) and Small Format Interchangeable Cores (SFIC).

How do you tell if your key is Schlage or Kwikset?

  1. Name on the key or Lock: Kwikset or Schlage are the most common residential locks and keys. …
  2. Name Abbreviation: Kwikset is “KW” and Schlage is “SC” The most common keyways are KW1 & SC1. …
  3. Name on the lock latch: look at the edge of your door on the latch for a name.

Can Kwikset be rekeyed to Schlage?

If the key will not slide into the lock, it is another brand, using another keyway, and that lock cannot be made to work from the existing key. … So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.

Is Kwikset a good brand?

Kwikset is a leading residential lock brand that homeowners trust ever since 1946 when the company was founded. Kwikset puts in a lot of planning and hard work to understand the needs of its customers so that it can produce locks that can protect their homes and belongings.

Article first time published on

Can Schlage locks be keyed alike?

Please note, products are not keyed alike across functions. Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key. Navigating your way through the Kit tray.

Where are Schlage locks made?

IndustrySecurity hardwareHeadquartersColorado Springs, Colorado, U.S. (1997–present) San Francisco, California, U.S. (1920–1997)

How do you remove a Schlage lock cylinder without a key?

  1. Step 1: Locate the position of the lock and unscrew the front side.
  2. Step 2: Remove the screw inside the lock’s body.
  3. Step 3: Turn the cylinder cam into a 12 o’clock position.
  4. Step 4: Eject the lock from the cavity of the door.

Are Kwikset deadbolts any good?

Seems to be well-made and high quality, as do other brands and models, but the smart key system on this lock makes it a great choice. It takes 10 seconds to change the lock to take any key, making it really easy to key all of the locks in your house alike, and easy to change the keys again and again should you need to.

Is Kwikset better than defiant?

Defiant is definitely making significant improvements along the years. Just a few years ago, it would have never performed better than a standard Kwikset lock. Adding 3 security pins and a drill resistant plate shows that defiant is going in the right direction, while staying the most inexpensive lock you can buy.

What brand of door locks is best?

  • BEST OVERALL: Kwikset Juno Keyed Entry Door Knob.
  • RUNNER UP: Schlage Encode Smart Wi-Fi Deadbolt.
  • BEST BUDGET: Schlage B60N 619 Single Cylinder Deadbolt.
  • BEST SMART: August Wi-Fi Smart Lock.
  • BEST TOUCH SCREEN: Yale Assure Lock SL, Wi-Fi Smart Lock.
  • BEST FINGERPRINT ACCESS: eufy Security Smart Lock.

How do you rekey a lock?

  1. Step 1: Remove the Doorknob. The first step is to remove the doorknob from the door. …
  2. Step 2: Remove the Cylinder. …
  3. Step 3: Take Out the C-Clip. …
  4. Step 4: Attach Key Plug. …
  5. Step 5: Dump the Old Pins. …
  6. Step 6: Insert New Pins. …
  7. Step 7: Replace the Plug. …
  8. Step 8: Reattach Knob to Door.

What is a Schlage C keyway?

For example, a Schlage “C” keyway is an open keyway that is available from many key and lock distributors. However, a Schlage “S123” keyway is available from only Schlage approved locations. While S123 is still an open keyway, it is only available from certain distributors.

What is deadbolt strike height?

According to ANSI specifications for cylindrical or mortise locks: … The lock strike centerline should be 40 5/16″ from the bottom of the frame with the lock in relation to the strike. The deadbolt strike centerline should be 48″ from the bottom of the frame.

Are all door knobs and deadbolts the same size?

Replacement hardware needs to fit your door, and hardware for a new door requires a hole saw in the correct size. Typically, deadbolts need a bore hole 1 1/2 or 2 1/8 inches in diameter. … The most common are 2 3/8 inches and 2 3/4 inches, but some hardware can fit multiple backsets.

What size hole do I put in a deadbolt?

The deadbolt lock set will come with a template to help you with measurements. Be sure to use the correct size drill bits specified in the lock set instructions, though most standard deadbolts require a 2 1/8-inch hole saw for the lock bodies and a 1-inch spade bit for the sliding bolt assembly.

What locks work with Kwikset?

  • 2GIG.
  • Clare Controls.
  • Control4.
  • Brilliant.
  • DSC.
  • Elan.
  • Abode.
  • Honeywell.

Will Home Depot rekey locks to match?

Home Depot will rekey locks such as Schlage, Kwikset, doorknobs, deadbolts, single and double cylinders for $5 to $15 per lock. If your local store does not offer the service, you may purchase a rekey kit or visit Lowe’s or Ace Hardware. Home Depot does not rekey car locks as they often require specialized technology.

Is Yale better than Kwikset?

In comparison to other similar locks on the market, the Kwikset Kevo is reliable but expensive if you compare it to other locks in the same category. The Yale T1L, on the other hand, is a lot more competitively priced if you look at other similar types of smart door locks on the market.

Are Kwikset SmartKey locks easy to pick?

The overwhelming majority of these trained professionals can’t do it. Even one of Kwikset’s most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick.

Are all Kwikset keys the same?

A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).

What grade is Schlage F?

Schlage F-Series handlesets All of Schlage’s front entry handlesets are graded Best in Security, Durability and Finish (AAA).

Can you buy multiple deadbolts with the same key?

When purchasing more than one lock, look for packages that have the same “key alike” number on the package. Alternatively, our store associates can key all of your locks to work with the same key. You can also purchase a rekeying kit to swap out pins and springs yourself.

How do you get all locks keyed the same Schlage?

To get your locks re-keyed, visit your local locksmith to have them do it for you. Or, just ask the store you’re purchasing the locks from to re-key the lock to one you may already own. It’s a process that should only take a few minutes.

What is keyed alike?

Let’s begin with ‘Keying Alike’. Essentially this is where all locks within a set have the same key code, or in other words, one key can used to open multiple locks within the set. Keying locks alike is a great time saving solution as, with only one key, time does not need to be spent looking for the correct one.

Who owns Schlage Lock?

On December 1, 2013, Schlage Lock, and 22 other commercial and residential security businesses separated from IR and formed a new company, called Allegion. Allegion owns Schlage to this very day.