Can you put an outlet in a drawer

The easiest way to get an electric outlet in a drawer or cupboard is by using an extension cable with a multi-plug on the end. This requires no cutting or electrical work to be done. The multi-plug can be double sided taped or screwed onto the back edge or bottom of the drawer.

Can you put an electrical outlet in a cabinet?

If there isn’t any more space available on kitchen walls, or you want to avoid making holes in a finished wall that will require drywall repairs, you can install an outlet into a cabinet wall. You can also run conduit through your cabinets if necessary to avoid having to pass wires through the drywall.

How does docking drawer work?

It’s a very simple device—basically a power strip designed to be installed in the very back of the inside of any cabinet or drawer—that will relegate your whole “charging station” (currently a plug in the wall, if you’re anything like us?) to a hidden-but-easily-accessible location in your home.

Can a power strip be in a drawer?

Measure the size of where the desktop power strip will sit inside the drawer. I placed mine on the bottom of the drawer towards the back. So the cable connect to wall outlet and glide freely. Use drill and jigsaw to cut the hole so the power strip can sit comfortably and securely inside the drawer.

Can I have an outlet in a closet?

An identical list of rooms requiring general purpose receptacle outlets is at 210.52(A) in the National Electrical Code (NEC), which also does not include a closet.

Where should electrical outlets be placed?

There’s a reason for that. The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every twelve feet measured along the floor line.

What is code for outlets in kitchens?

In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.

Is it safe to put a surge protector in a drawer?

I know of no harm. The real risk is putting too much load on the wiring, either of the mains outlet or the wiring from the mains to the load on the second strip. Too much load is bad on any power strip. Plugging one strip into another increases the likelihood of overload.

Where should outlets be placed in a bathroom?

Outlet Receptacles You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks. Avoid positioning a receptacle over the center of the sink, where cords hairdryers and electric shavers might hang down into the basin.

How do you add an outlet to a nightstand?

1. Drill Your Hole. First, place your nightstand on its side on a flat surface. …
2. Add Power Strip. Next, place the power strip in the top drawer of the nightstand. …
3. Attach With Velcro. Finally, secure the power strip to the bottom of the drawer with sticky Velcro dots so it stays in place and doesn’t rattle around.

Article first time published on

Are docking drawers safe?

We used our expertise in the semiconductor industry to create never before seen, totally safe in-drawer electrical outlets. Not only certified, they all have interlocking safety features which ensure our products are smart, simple, and safe solutions for drawers and cabinets worldwide.

How do you hide a charging station?

DIY Box Charging Station Hiding your electronic cords can be as simple as wrapping a shoe box in pretty paper and cutting holes for the cords to slip through!

How do I organize my charging station?

Turn a desktop organizer on its side to create a charging station for just a few buckets. Create a dock for all your family’s devices using a shelf, a basket (for the power strip) and some dividers. These mudroom lockers have charging stations built in to each section.

Can you put an electrical outlet in a closet in Ontario?

There should not be any receptacles located inside of cupboards or closets.

Do storage rooms need outlets?

All Occupancies. Now, attics, underfloor spaces, utility rooms, and basements, must have at least one lighting outlet containing a switch or controlled by a wall switch, located where these spaces are used for storage or contain equipment requiring servicing. …

How far from a sink can an outlet be?

Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.

How far should a plug be away from a sink?

Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible.

Are outlets allowed in baseboards?

But there is a better way. By installing electrical outlets in the baseboard molding of your home they can seamlessly integrate into a design element that almost camouflages the outlet. By doing this small detail, you can eliminate the presence of noticeable unsightly cords and wires from your home.

Where do you put a plug in a bedroom?

Once you know the best place to position the bed, aim to position plug sockets on either side. You may want to use single or double sockets with USBs too, so you can charge devices like phones, tablets and e-book readers. Also sockets work well in the corners, where you are likely to position furniture or TVs.

How far apart can outlets be?

The maximum spacing between receptacles, according to the National Electric Code (NEC), has been set at 12-feet since 1956–with no point along a wall being more than 6-feet from a receptacle. The logic behind that number is that an appliance with a standard length cord could then be plugged-in anywhere along the wall.

How far from the floor should an outlet be?

Standard Height for Outlet Boxes The standard height for wall outlet boxes is about 12 inches from the top of the floor covering to the bottom of the receptacle box (or 16 inches to the top of the box).

Can an outlet be over a sink?

The National Electrical Code doesn’t have any specific requirement regarding the height of a receptacle above a vanity. The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop.

Why do bathrooms only have one outlet?

The National Electric Code states that, at a minimum, a bathroom needs one GFCI-protected outlet. … If you’re using a single GFCI outlet for protection, it must be wired for “multiple location” protection; this way, it will protect all the downstream outlets on the same circuit.

What is the electrical code for bathrooms?

The NEC requires that all outlet receptacles in a bathroom be GFCI protected. Outlet circuit must be 20 amps: The outlets in a bathroom should be served by a 20-amp circuit, separate from the lighting circuit, to provide power items such as curling irons, razors, and hairdryers.

Can I add drawers to my vanity?

Want to get more counter space in your bathroom? Convert the top drawers in your vanity into a full-length drawer! This large cabinet drawer will allow you to store larger items like hair styling tools, makeup bags, and beauty products. Be sure to add organizers into this drawer, too, to keep everything neat and tidy!

Can you add a drawer to a cabinet?

Install the bottom drawer first. Use the provided screws to install the end of the drawer slide (that’s the part that extends) to the side of the frame at the front of the cabinet. Or, if you don’t have face-framed cabinets, you can install the drawer slide directly onto the side of the cabinet.

Is daisy chaining power strips bad?

The proper use of a power strip usually does not cause a hazard. … It’s the improper use that can cause safety issues, such as creating a potential electrical failure and/or a possible fire hazard. An example of using power strips unsafely is when they are “daisy chained” together.

Can you plug a mini fridge into a surge protector?

Surge protector can work on a mini fridge or any appliance. It has passed ETL safety certification and will protect your device from surges and spikes. Surge protectors are used to absorb voltage spikes. These can both affect equipment or be caused by equipment.

Can I plug an extension cord into a power strip?

DON’T “daisy chain” power strips and extension cords—just don’t. … Only plug in an extension cord into a power strip if the power strip has been hard-wired into the electrical system. Otherwise, avoid plugging an extension cord into a power strip. Only plug power strips directly into a wall outlet.

How do I run an extension cord in the middle of a room?

Extension Cords and Power Strips The easiest, least obtrusive way to handle cords for desks you position in the middle of a room is to run an extension cord from the nearest outlet to a power strip beneath your desk, which you can then use to power any devices on your desk.

What is a recessed outlet?

Recessed outlet hardware has a faceplate that is set deeper into the wall than a regular outlet. That means it prevents plugs and connectors from protruding above the surface of the wall. It’s aesthetically better looking, and in certain applications, it can be a lifesaver.