Can you use a firelog in a wood stove

No. Our firelog and firestarter products are designed to only be used in traditional wood burning fireplaces and outdoor fire pits. They have not been tested to be used in a wood-burning stove.

Can I burn a firelog in a wood stove?

Duraflame firelogs (other than stax logs) should not be burned in wood stoves or fireplace inserts that have doors that will affect airflow. … Glass doors can be closed after the firelog is no longer burning to keep warm air in the house.

What kind of wood should you not burn in a wood stove?

Efficiency: The efficiency of your wood stove can depend significantly on the type of wood you are burning. Softwoods and resinous (oily) woods may burn inefficiently. For this reason, pine, eucalyptus, birch, aspen, and a few other species do not make the best logs for a wood burning stove.

Why can't I use a firelog in a wood stove?

reason 1. They outgas very quickly and burn HOT because of the wax, and can very quickly and easily overfire a stove, even at low air control.

Are wax fire starters safe for wood stoves?

Let the wax cool overnight and use to get your next fire started! We found these worked best using some kindling with the fire starter. NOTE: Only burn these in a wood burning fireplace or in an outdoor fire pit. Do not use in a gas burning fireplace or wood stove.

Can I use a firelog in a fire pit?

Yes, all Pine Mountain Firelogs are appropriate for outdoor use, including fire pits, camping, and chimineas as long as they are not burning in an airtight container.

Why are Duraflame logs bad?

Other sites state that frequently burning fire logs (and even wood) can pose some health concerns. The carbon monoxide emitted can cause symptoms including headaches, dizziness or nasuea. … The Duraflame site states that, “…they only burn with flames and do not generate adequate coals for cooking.”

Can I use Duraflame logs in Solo stove?

Can you use duraflame in Solo stove? The Duraflame site states that, “…they only burn with flames and do not generate adequate coals for cooking. I would not use a Duraflame-type log in a Solo stove. The Solo stoves are all double-walled to perform the gasifier function – burn quick and hot.

What is duraflame made of?

Duraflame firelogs are made of a scientific blend of sawdust, wax, and unique fibers. Some interesting materials tested have included recycled fibers such as nut shells, seeds, fruit pits, distillery grains and recycled cardboard. Natural seed is added to some logs to create crackling sounds of a wood fire.

Can you burn freshly cut branches?

When a living tree is cut down, the timber needs to age or “season” for a minimum of six to nine months before burning. Freshly cut wood, called green wood, is loaded with sap (mostly water) and needs to dry out first. It’s hard to light and once you get it going, it burns very efficiently and smokes horribly.

Article first time published on

Is Boxelder a good firewood?

Box elder is a low density hardwood that burns more like a softwood. Box elder firewood is mediocre at best. It burns fine but it burns quickly. … Box elder firewood is good for starting fires and makes decent kindling.

What firewood is yellow?

Re: Bright yellow wood, what is it? Osage, also known as hedge. Mulberry is also that color.

Can I burn candle wax in a stove?

Fill a large pan with water (around half full) and place it on your hob/hotplate to heat. Place your wax in a smaller pan, glass bowl, or pouring jug. Put your smaller pan, glass bowl or pouring jug in the large pan and heat over medium heat until your wax has melted. … Remove your wax from the heat and let cool to 65°C.

What is the best way to start a fire in a wood stove?

The Best Way to Start a Fire in a Wood Stove In a top-down fire, the larger logs are placed on the bottom, with progressively smaller logs, kindling and then newspaper added on top. The newspaper is lit, and the fire slowly burns down to the large logs below.

Do fire starters cause creosote?

Wet Firewood For starters, dry wood is easier to light than damp wood. Even more importantly, the moisture in wet firewood makes it smoke and leads to rapid creosote buildup in the chimney liner. In fact, creosote buildup is a leading cause of chimney fires.

Are Duraflame logs bad for your fireplace?

This is a myth. Artificial firelogs are not bad for your fireplace; in fact, they’re cleaner, safer, easier, and cheaper than regular wood. Artificial firelogs are also known as fake firelogs, wax firelogs, or artificial wax firelogs.

Is duraflame better than wood?

Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke. … These firelogs produce a significant amount of heat per pound and they are a good use for waste sawdust from wood mills and other woodworking companies.

Is duraflame safe indoors?

None of these firelogs are intended for—or any good at—cooking over. … Duraflame makes a product called a Roasting Log for use in outdoor fireplaces or campfires, and though they’re approved for cooking, they don’t make the nice flames of the indoor logs, and they’re not as light-it-and-forget-it as indoor firelogs.

Can I put a Duraflame in a fire pit?

Verified Reply – JulieYes, these logs can be used in those types of fire pits. Make sure to start with two logs per instructions. Do not add any wood or other materials, as the fire could get too hot.

What are the best logs for a fire pit?

Hardwoods: Arguably, the best wood for fires is Hardwoods such as Oak. Hardwoods burn longer than other woods, and burn cleaner, meaning it creates less smoke and residue than other woods. These denser woods will produce a hotter, stronger, and long-lasting fire.

How do you light a fire with a fire log?

Ensure that all air vents in the fireplace are open. Put the logs on the bottom of the fireplace. …
Add a layer of small logs of about 4 cm, and then one or two layers of kindling. Remember that air is important – approx. …
Put a couple of firelighters on top of the layer of kindling wood. …
Light it!

Can you cook over Pine Mountain Fire Logs?

Can I cook over Pine Mountain Firelogs? It is not recommended to cook over firelogs.

Does Clorox own duraflame?

Duraflame is sold to Clorox.

Is duraflame toxic to dogs?

Firestarter logs (commonly known by the brand, Duraflame) are readily available in the house. These logs are designed to start fires in fireplaces easily, as they are highly flammable. If ingested by dogs, the compressed sawdust and wax within these logs can result in a foreign body obstruction in the stomach.

Can I use starter log in Solo Stove?

Can I use them in any Solo Stove? Solo Stove Starters are made to be used in any Solo Stove, camp stove, fire pit, or grill.

Does Solo Stove give off heat?

Does the Solo Stove give off substantial heat? We have found that it gives off quite a bit of heat, plenty for a family to keep warm, and I’ve even found myself having to back away from it a little. We have had as many as five people around it at one time, and there was plenty of heat to keep everyone warm.

What is the hottest burning wood?

Osage orange, 32.9 BTUs per cord.
Shagbark hickory, 27.7 BTUs per cord.
Eastern hornbeam, 27.1 BTUs per cord.
Black birch, 26.8 BTUs per cord.
Black locust, 26.8 BTUs per cord.
Blue beech, 26.8 BTUs per cord.
Ironwood, 26.8 BTUs per cord.
Bitternut hickory, 26.5 BTUs per cord.

What tree makes the best firewood?

Hardwood Firewood Hardwoods such as maple, oak, ash, birch, and most fruit trees are the best burning woods that will give you a hotter and longer burn time. These woods have the least pitch and sap and are generally cleaner to handle.

Is Melaleuca good firewood?

Acacia binervataTwo Veined HickoryMelaleuca styphelioidesPrickly Paperbark

Is boxelder wood good for anything?

Boxelder has been used for food containers such as crates and barrels. Crafters have cut wooden utensils (treenware) from the wood. Add to this list toys, basic furniture, and cabinets, as well as carvings.

Is boxelder hard to split?

Typically, boxelder wood is gnarly, twisted and tough to split. The wood is very heavy when it’s wet and almost as light as balsa wood when it’s dry. Many people compare burning boxelder with burning silver maple.