How big is a jon boat

Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.

How much can a jon boat hold?

At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs. At 20+ feet in length a jon boat is able to hold up to 1,900 lbs of people and equipment.

How heavy is an aluminum boat?

Type of BoatAverage WeightAluminum Fishing Boats300 – 500 poundsBow Rider3,000 – 3,500 poundsCabin Cruiser12,000 – 16,000 poundsCuddy Cabin3,000 – 5,000 pounds

How wide is a 16 ft jon boat?

Jon boats sold commercially vary in width related to their length. 8-foot jon boats average 32 inches; 10-12 foot boats average 34-40 inches; 14-16 foot boats average 42-50 inches, and 18+ foot jon boats can be up to 60 inches wide.

How thick is an aluminum jon boat?

090- to . 125-inch “sheet” aluminum hulls, the same thickness range and aluminum grade — 5052 — as most aluminum fuel tanks. The plate aluminum boats we’re focusing on in the 20- to- 40-foot range might have hull plating from 3/16 to 1/4 inch thick — about twice as thick as the smaller boats just mentioned.

How do you size a Jon boat?

Measure from the middle of the bow to the center of your transom down the length of your Jon. You can check it at two points along the top and bottom of your Jon boat to ensure your measurement is correct. Width. Width is measured at the bottom of the boat from one side of the boat to the other.

How wide is a 15ft Jon boat?

Length4.57 m15’Beam1.52 m5′Bottom Width1.07 m3′ 6”Max. Recommended HP25 HPMax. Person Capacity3 persons

How much does a 12 foot aluminum boat cost?

A cheap 12 ft polythene Jon boat can be bought for as little as $550 while an 12 ft aluminum Jon boat can cost as much as $3000. High-end 21 ft Jon boats can cost as much as $30,000.

How wide is a 14ft Jon boat?

How wide is a 14-foot Jon boat? Around 57 to 70 inches on average.

How much does a 12 Jon boat weigh?

The average Jon boat weighs about 500 pounds. Jon boats can weigh between 78 to 1056 pounds (35 kg and 483 kg). The weight is dependant on the boat’s constructional material, length and width. This estimate is dry hull weight.

Article first time published on

What's the weight of a 14 ft aluminum boat?

You can find some v-hull designs that are in the 150-pound range, which are reasonably easy to move around. But flat-bottomed jon boats tend to weigh more. Add in under-floor storage and a wider design and weights approaching 300 pounds are possible.

Do aluminum boats rust?

Although aluminium boats are corrosion resistant, they are not corrosion proof, especially if a low-grade aluminium is used. Luckily, there are a variety of ways to prevent and protect your boat from the effects of oxidation and corrosion.

Is aluminum hull better than fiberglass?

Modern boats are most often constructed of fiberglass, but aluminum is the best material to choose for a workboat. Aluminum is more durable than fiberglass, which is prone to breaking or cracking from impact. Aluminum is more resistant to punctures also.

What kind of aluminum are Jon boats made of?

Aluminum Grade-TemperYield strength (psi)Workability5052-H3228,000Fair5083-H321 (Interchangeable With: H111 & H116)33,000Good5086-H3230,000Excellent6061-T640,000Good

What's the biggest jon boat?

SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.

How deep are Jon boats?

Jon Boats are available in a range of sizes with typical common lengths around 12’2” (3.7 m), widths of 4’3” (1.3 m), depths of around 2′ (. 61 m). Jon Boats are flat-bottomed boats with two or three bench seats ideal for fishing, hunting, or civilian protection during floods.

What is a double wide jon boat?

A double wide Jon boat, also called an extra wide Jon boat, is a flat bottom boat that has all the same features and functionality as a normal Jon boat but it has a wider beam.

How heavy are Jon boats?

You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg).

Are Jon boats good for Rivers?

Why Jon Boats are Great for Fishing. Because jon boats have a flat-bottom, they tend to sit on water rather than cruising through it. This allows jon boats to ride easily on shallow waters. … With this kind of draft, jon boats can travel into small rivers, streams, coves, bayous, and inlets, where most boats would not go …

What is the beam of a Jon boat?

The beam width of your boat is the widest part of its hull which is usually the stern of a Jon boat. The quickest way to measure the beam of a Jon boat is to measure the back part of the boat at the boat’s widest point, taking the measurement from one side to the other.

What is a 1436 jon boat?

A 1436 Jon boat is a flat bottom, shallow draft watercraft used almost entirely on inland bodies of water. The 1436 number in the name refers to the length of the boat and the width of its bottom. A 1436 Jon boat is 14 foot long and has a bottom that is 36″ wide.

What do you call a flat bottomed boat?

But what do you call a flat bottom boat? A flat bottom boat is often referred to as a shallow draft boat or sometimes as a shallow water boat. … Jon boats, scows, drift boats, flat bottom skiffs, dory boats, canal boats, narrowboats and rafts are common flat bottom boats.

How wide is a jon boat trailer?

ModelJBT-900GVWR (lbs)1,000Weight (lbs)200Width (Overall)4′ 9″Width (b/w Fenders)3′ 7”

How much is a brand new jon boat?

From a few hundred to thousands of dollars for a new Jon Boat, the average price is $5,400.

How much does a 16 foot boat cost?

Smaller vessels in the 16 to 20 foot range average $30,000 – $60,000 and larger, dedicated offshore boats may cost in excess of $100,000.

Where does the name Jon boat come from?

Allegedly, the boats came to be known as jack boats but as time went on jack became John (John is a common variant to Jack) and people started calling them Ozark john boats. In later decades the name was modified to jon boat and it came to mean all flat bottomed boats.

How much does a 12 aluminum boat and trailer weigh?

Trailer Boat SizeTrailer Weight CapacityTrailer Weight12 to 14-foot boat400 pounds150 pounds

How much does a 16 foot aluminum boat way?

How much does a 16 ft boat weigh? Depending on the boat type, between 1,332 lbs. and 1,884 lbs. without a trailer.

What size engine do I need for a 14 foot boat?

Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.

Are aluminum boats worth it?

Aluminum boats are great value because they have a longer lifespan than any other craft. Typically, an aluminum boat can last 30-40 years with regular and little maintenance. Aluminum doesn’t rust or deteriorate over time, and while it can corrode, it will last a lifetime if it is adequately maintained.

Is it OK to take an aluminum boat in salt water?

Aluminum boats are safe to be used in saltwater; in fact, aluminum is known for its ability to resist corrosion well, but it can still corrode under certain circumstances. For boating in saltwater, extra maintenance is required for a boat; apart from that, using an aluminum boat in saltwater is Ok.