How do I hide the liner in my pond

Flagstones or field stones provide the simplest method of hiding a pond liner. Simply create a flat shelf of soil about 8 to 12 inches below the intended surface of the pond, then install the liner over it. You can stack flat stones on the shelf to hide the liner and keep it in place.

How do you hide a waterfall liner?

1. Spread an inch layer of sand or gravel over the parts of the liner that are flat enough to hold it. …
2. Layer decorative rocks over the liner. …
3. Place a manmade but natural looking substance made for covering liners.

How do you cover plastic in a pond?

Bricks, Pavers, Flat Slate or Hewn Rock The flat surfaces of brick, pavers, slate and cut rock slabs makes them easy to fit together to form a low border to cover the pond’s edge. They may fit naturally on the soil or can be placed on a base of sand to keep the bottom layer level.

Should pond liner be covered?

Another benefit of a rock-bottom pond is extending the longevity of the liner. One of the biggest factors that degrades an EPDM liner is UV damage from the sun. Covering the liner with rocks will keep the sun from hitting it and prevent this UV damage.

Can you bury a pond liner?

move them out of the area. You can choose to haul the liner out (probably easiest to cut it out in sections) or fold it in and bury it. If you plan to plant trees/shrubs in the same area you will have to remove the liner otherwise it will create problems with root growth. Step 3: Remove pumps and pump/skimmer housings.

What should I put on the bottom of my pond liner?

1. Makes the bottom of the pond look natural and hides the liner material.
2. Creates biological environment for beneficial bacteria to break down organic sludge.
3. Rocks and gravel provide media for aquatic plants to attach their roots.

How can I make my pond liner look natural?

Another way to make your pond look more natural is to use plants around the pond’s edge to hide the pond liner. There are many different options when it comes to edging a pond with plants. You can plant ornamental grasses, flowering ground covers or bog plants like irises or canna lilies.

Do you have to put rocks on pond liner?

There are also benefits to keeping the liner rock free in your pond. … Without the rocks in the bottom, cleaning/vacuuming the bottom of your pond will be a lot easier. Bare liner ponds used by fish enthusiasts typically have a bottom drain which will make draining and cleaning easier when done more often.

Should I line my pond with rocks?

Benefits Of Using Pond Rocks Pond rocks will make your pond look more natural than the black rubber liner will. Rocks also help protect the liner from tearing and from UV ray damage. Pond rocks give a home to beneficial bacteria that clean your pond water. Ponds should make your home look like it was built around it.

Can you use carpet underlay for pond?

Carpet is sometimes suggested as a pond liner underlay and you might get away with this – just ensure that the carpet is a man-made fibre such as polypropylene as a natural fabric such as wool will rot over time reducing it’s effectiveness as a barrier and leaving the pond liner exposed to danger.

Article first time published on

Can you fill in a natural pond?

There are two ways that you can fill your pond: one with water and the other by draining your pond and adding material to fill it in. If you fill your pond in with water, this means that you are keeping it, and if you decide to drain and fill it, then you are getting rid of it for good.

Can you overlap pond liners?

Yes, it is possible to overlay your pond liner with sand, gravel, rocks or other materials. In order to protect the pond liner from any damage from these, we would recommend placing a layer of geotextile underlay over your pond liner before these are added.

How do you fill a pond with dirt?

1. Drain the water to somewhere (public drain?)
2. Remove rubber tarp that’s likely containing the water.
3. Fill the hole with the huge rocks from the edge and alternate rock source (link below)
4. Drop clay/soil over the rocks to fill in the gaps.
5. Seed with grass and water. Pond overall:

How do you dress a pond?

Stones. Small stones or pebbles are ideal for decorating the area around your pond. You can also place a few large stones in shallow areas of the pond for birds and small insects to land and take a drink.

How long does a pond liner last?

To summarize, a rubber pond or flexible PVC liner can last for 20 years or longer as long as they are installed over a protective underlay and secured in place using the right edging materials and are protected against visits by clawed animals.

Should I put gravel on the bottom of my pond?

Not only do pond pebbles keep your water clean, they create a natural looking bottom layer and help to provide a safe habitat for your fish. … Pebbles also provide a surface where helpful bacteria can grow, and this bacteria helps to break down dirt in the pond, keeping the water fresher for longer!

Should you put sand in the bottom of a pond?

That won’t make your clients happy!” “Installing sand on the bottom of a pond or natural pool might create an environment where harmful microbes could dwell, and that may put your clients and their expensive koi fish at risk of contracting a waterborne illness!” “Any disturbance in the sand, whether it be a fish …

Should I put soil in the bottom of my pond?

Putting your pond plants in special aquatic baskets is better than adding a layer of soil all over the bottom of pond. Too much soil creates an excess of nutrients, which can encourage algae. … Shrubs and other ornamental plants can provide valuable cover and food for wildlife, especially for birds.

Can I use beach pebbles in my pond?

Pebbles are not only a safe addition for a garden pond, they are downright helpful. In addition to serving as a natural-looking bottom layer, they help to keep the pond’s water clean and aid in providing a healthy habitat for fish.

What do you put on top of a pond liner?

Adding cement, mortar, or concrete over the top of a pond liner will add strength and durability to the pond liner. Adding that extra layer over the top of the plastic will also allow you to use a broader variety of decorations and plants.

Why does barley straw clear ponds?

How Does Barley Straw Work? Barley straw prevents the growth of algae. It does not kill existing algae. … It is believed that the decaying straw releases chemicals that inhibit the growth of algae.

How do you stack rocks around a pond?

Stack flat rocks securely around your pond’s edge to create an area where birds can congregate. Partially submerge other rocks, allowing part of them to remain above the water’s surface to serve as places where birds can sun themselves and bathe in the pond.

When can I add fish to my pond?

You should wait at least 72 hours before putting fish in your new pond. Even if only the water is new. This way the water temperature and chemistry can level out. Drastic changes in either can have a serious impact on the health of your fish.

What is the best gravel for a pond?

Installing Gravel Use well rounded gravel or river rocks to line the pond without fear of tearing the liner. Gravel with a stone size between 1 and 3 inches in diameter is best.

What kind of sand goes under pond liner?

Lining the pond Remove any lumps or sharp stones from the hole. Then spread a 3cm (1.2in) layer of soft builder’s sand over the area. This will help protect the butyl liner being punctured. A layer of pond underlay or old carpet above the sand will provide additional protection.

What do you do with a pond you don't want?

1. Renovate your pond so it looks the same but functions smoothly and stays low maintenance so you can work less to enjoy more.
2. Transform your pond into a pondless water feature so it’s even less work.
3. Turn your unwanted pond into a fountainscape for a totally new look.

What is the best way to fill a garden pond?

The professional method would be to remove all the hardcore, trash, etc. Then pump out the water. Then fill with the same soil type, clay, up to the top soil loam layer. The fill soil is tamped (compressed) every 4-6″ of added clay.

How do you join two pieces of pond liner?

1. Lay one piece of the liner over the other so that there is a minimum 100mm overlap. …
2. Fold back the top liner (you can use a small amount of the QuickPrime Plus to hold the liner back against itself) and check that the two surfaces that will be joined are clean and dry.

How do you cover a pond for safety?

1. Metal mesh (not chicken wire). Metal mesh is the most popular and cost effective way to cover a pond. …
2. Fencing. Having a fence around a pond can offer some safety in protecting your child but this is not fool proof as some toddlers are good climbers. …
3. Commercial products.

How do I empty an old pond?

Probably the easiest way to drain a pond is to use your pond pump, with submersible models being the preferred choice to due to easier drainage. To start emptying a pond using a submersible pump you just need to position the out-take hose into your garden or the area you want water drained.

How do I fill my garden pond with water?

If possible, use collected rainwater to fill your pond, or fill from the tap with a hose. To stop the sand substrate dispersing, rest the nozzle of the hose on a plastic bag to absorb some of the energy. If you do fill your pond with tap water then leave it so stand for a few days before adding it in.