How do I program my WaterBoss water softener

Resetting the Unit To reset the unit, remove the transformer from the power outlet, then let the WaterBoss rest for 30 seconds before plugging the transformer back into the wall. This cycles the water softener’s power, sometimes enabling the controller to find the home position once again.

How do I reset my water Boss water softener?

Resetting the Unit To reset the unit, remove the transformer from the power outlet, then let the WaterBoss rest for 30 seconds before plugging the transformer back into the wall. This cycles the water softener’s power, sometimes enabling the controller to find the home position once again.

How do I reset my digital water softener?

Manually Resetting the Regeneration This is a modern water softener with an electronic control head. It has a “regen” button on the head at the end. This “regen” button has to be pressed down and held for three seconds, and the regeneration cycle will begin immediately.

How do you set the regeneration time on a 900 WaterBoss?

To quickly advance through the regeneration cycles, press and hold the Regenerate button for 2 seconds. Wait for the cycle to begin, after 20 seconds press and hold the Regenerate button until the cycle number changes (about 2 seconds.) Each cycle can be advanced in this manner.

Does a water softener have a reset button?

The HARDNESS and RECHARGE TIME never require resetting unless a change is desired. Even if the clock is incorrect after a long power outage, the softener operates as it should to keep your water soft. However, regenerations may occur at the wrong time of day until you reset the clock to the correct time of day.

How do you set a 900 WaterBoss?

Push the SET button and hold for three seconds to display a default hardness number. Push the CHANGE button until the number displayed matches your hardness setting number, and then press SET to save the number. The WaterBoss 900 hardness display will only go up to 90.

Why is my WaterBoss beeping?

Water softeners beep to inform you it is low on salt, supply water is turned off, or something in the softener is not working. … It is usually best to schedule service and get a technician to check the softener when it is beeping.

How do I set the regeneration time on my water softener?

To adjust the time, press the down arrow (or up arrow, depending on what time you are changing to). Hold the arrow until you reach the correct time of day. Then, press the cycle button (which looks like a circular pattern of arrows) and you’re all done!

How long does it take for a WaterBoss water softener to regenerate?

WaterBoss can regenerate in as little as 15 minutes while conventional softeners can take nearly two hours.

What kind of salt do you use for Waterboss?

A salt substitute, potassium chloride may be used. However, potassium chloride is not recommended where iron is present in the water supply. Where there is iron in the water, pellet salt with a rust remover is recommended. The use of rock salt is not recommended because it contains impurities.

Article first time published on

How do I adjust the hardness in my water softener?

Press the UP or DOWN buttons to set your water hardness number. NOTE: If your water supply contains iron, compensate for it by adding to the water hardness number. For example, assume your water is 20 gpg hard and contains 2 ppm iron. Add 5 to the hardness number for each 1 ppm or iron.

What happens if your water is too soft?

Too soft water will be aggressive to your plumbing. Softened water by cation exchange replaces calcium and magnesium with sodium, which reduces lifelong supplemental calcium and magnesium intake with lifelong extra unnecessary sodium intake.

What happens if your water softener is set to high?

Soft water provided by a utility does not need additional softening and may cause corrosion issues for your home. Make sure the softener is set to the hardness of your water supply. If the hardness is set too high, the softener will cost more to operate and waste water, costing you extra money.

What does E1 mean on my water softener?

The E1 error on the WaterBoss water softener means “Home not found.” If you are seeing this error, it means your controller is likely not properly connected to the water softener. … If that doesn’t make the E1 error go away, there may be a more serious problem with your water softener.

What does E1 code mean on Culligan water softener?

The error code E1 indicates that the motor inside your Culligan water softener is having trouble moving the parts. It generally causes due to the dust and dirt stuck in the piston.

How long does a Waterboss water softener last?

While they can last much longer if well maintained, water softeners have a typical lifespan of between 10 and 15 years. If your water softener was installed more than a decade ago, replacing it may be the right option.

How much salt does a Waterboss 900 hold?

The Waterboss 900is, however, an ion exchange water softener. That means that, during the regeneration process, it will use 27 gallons of water and 6lbs of salt in order to regenerate the resin so that it will still attract magnesium and calcium.

Can you regenerate water softener too often?

It is generally agreed upon that regular regenerations are the best, because they keep the resin bed active. This should be every two to three days, although highly efficient softeners may generate every day or even multiple times a day.

When should I manually regenerate my water softener?

Experts agree that regular regenerations are the best, because they keep the resin bed active. This should be every two to three days, although highly efficient softeners may generate every day or even multiple times a day.

How do you reset a water softener after a power outage?

Turn on the system and press the power display. Set the regeneration time according to your comfort. Again hit the display button to reset the time of the day.

What is bypass on water softener?

Always install a water softener with a bypass system. Bypass valves allow you to turn off water to the softener for maintenance while still having water through your house pipes. … The inlet and outlet valve connects to the bypass valve. Push in for bypass; pull out for “service” (soft water).

How many gallons should a water softener regenerate?

How many gallons of water does it take to regenerate? During regeneration, a typical water softener for a family of 4 uses approximately 35 to 65 gallons of water, depending on the size of the water softener.

How many bags of salt do I need for a water softener?

You will likely need to add one full 40 lb. bag of salt to your water softener per month (on average), to keep your salt at an adequate level.

Is it bad to let your water softener run out of salt?

Water softening salts are essential to treat water and maintain the high performance of water softeners. When the water softener runs out of salt, it can cause long term damage and harm your water fixtures. It can even result in tank overflowing.

Why does my boss water softener use so much salt?

Salt Level Is Too High (or Water Is Too Low) Your water softener uses salt as it works, but you should see about 3-4 inches of salt above the water level in your tank. … Ideally, you should fill salt to an appropriate level for your household, then let the salt drop until you see the water level in the brine tank.

What is a good level of water hardness?

The membrane manufacturers will often specify what the maximum hardness concentration can be, but industry rule of thumb is that hardness should not exceed 120 to 170 mg/L (7 to 10 grains per gallon).

Is the higher the number the softer the water?

The higher the number, the softer the water. – Quora. Hard water usually contains minerals in the water that when that water is used to wash dishes or take a bath it leaves behind a residue.

What is the scale for water hardness?

Measures of water hardness General guidelines for classification of waters are: 0 to 60 mg/L (milligrams per liter) as calcium carbonate is classified as soft; 61 to 120 mg/L as moderately hard; 121 to 180 mg/L as hard; and more than 180 mg/L as very hard.