How do I use intercom on my Panasonic phone

Answer Not Found

What is the intercom button on a phone?

The Intercom feature allows hands-free, peer-to-peer conversations between users on desk phones. It enables you to call an individual extension and the destination phone automatically answers the call in speakerphone mode.

How do you use intercom on Panasonic KX dt333?

1. Hit the Pause button.
2. Hit the Flexible Button you wish to store the number to.
3. Dial 2.
4. Enter the Calling Out line access number, then the number you wish to store.
5. Hit Auto Dial to store it.
6. Hit Pause to exit.

How do you answer an intercom call?

1. If you hear two beeps (which means that your phone has Handsfree Answerback), speak toward the phone or lift the handset for privacy.
2. If you hear one beep (which means that your phone does not have Handsfree Answerback), lift the handset to answer.

How do you use the intercom on a Panasonic KX dt543?

To conference two outside callers, place or receive first call. Press the CONF key (conf key will flash). Now dial 9 plus the outside number of the second party. When they answer, announce the call then press the CONF key.

How do I set Co in Panasonic KX t7730?

Press “Program” “CO button” “1” “Extension Number” “Store” or “Program” “CO Button” “2” “9 + Phone Number” “Store”. A “9” must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., “9-1-212-555-1234.”

How do I program my Panasonic KX t7731?

Programming one-touch dialing depends on the type of your main unit. If you have a KX-TA624, push the “Program” button. Press either “CO” followed by “2,” or the “Program Feature” button. If you have a KX-TA1232, push the “Program” button and dial “99.” Push either the “CO” or “Program Feature” button, and dial “2.”

How do I find my intercom number?

Press any intercom button. You’ll see your extension number in your display. Press any programmable button. You’ll see the feature or number stored on that button in your display.

How do I set speed dial on my Panasonic cordless phone?

1. Press and hold the desired speed dial key (1 – 9).
2. Press [ADD].
3. Press the arrow up ▲Up Arrow or down ▼Down Arrow button to select “Phonebook”.
4. Press [SELECT].
5. Press the arrow up ▲Up Arrow or down ▼Down Arrow button to select the desired entry.
6. Press [SELECT].
7. Press [SAVE].

Where is the extension number on a Panasonic phone?

If you use a Panasonic display proprietary telephone, you can check your own extension number on the display. Press the TRANSFER button or Soft (S1) button while on-hook. The displays and the illustrations shown as examples are from a telephone connected to the KX-TDE200.

Article first time published on

How do I use Panasonic headphones?

1. Press the Program Button.
2. Hit 6 & 1 on keypad. Screen should show Headset Mode.
3. Press Auto Dial / Store Button.
4. Press up arrow till screen shows “Headset On”
5. Press Auto Dial / Store Button.
6. Press the Program Button.

How do I mute my Panasonic KX DT521?

*1 If you hear your own voice through the handset or headset, decrease the volume. *2 For KX-DT521, press [PAUSE/PROGRAM].

How do I program my Panasonic KX dt321 PHONE?

1. Hit the Program Button.
2. Hit the Flexible button you’d like to store the number to.
3. Dial 2, followed by the Outside Line Access Number, followed by the phone number you wish to store.
4. Hit Auto Dial.
5. Hit Program.

How do I make a conference call on Epabx?

Press the Flash key (dial tone). Dial the second party’s extension number (inform about the conference). Dial 3. During the conference, conference tone will be heard.

How do you forward calls from a landline to a Panasonic phone?

Dial star-seven-two (*72) from your landline phone and wait for a dial tone. Press the 10-digit number of the cell phone where you’d like your calls to be forwarded to. Press the pound button (#) or wait for a response indicating that call forwarding has been activated. End the call.

How do I transfer a call extension to another Panasonic KX t7730?

To forward calls to an outside line, press 6, dial the line access code followed by the phone number and then #. To forward calls via FollowMe, press 7 followed by your extension number. To cancel FollowMe, press 8 followed by your extension number.

How do I reset my intercom phone?

1. Open the app.
2. Go to Settings.
3. Select your device.
4. Find Status and tap it.
5. Tap Reset to factory button.