How do you change a bulb on a Dimplex fire

Begin by turning off your electric fireplace/insert. … On the back of your electric insert you should find a Rear Access Panel. … Locate and replace the light bulbs. … Install your new bulb by screwing it in a clockwise motion. … Secure the rear access door with the appropriate screws.

How do I change the bulb in my electric fireplace?

Begin by turning off your electric fireplace/insert. …
On the back of your electric insert you should find a Rear Access Panel. …
Locate and replace the light bulbs. …
Install your new bulb by screwing it in a clockwise motion. …
Secure the rear access door with the appropriate screws.

How do you fix the flame on a Dimplex electric fireplace?

Unplug the fireplace from the wall or isolate the power.
Remove the access cover to the fireplace, typically located at the rear of the unit.
If the bulb(s) have blown, replace them.
If the motor that drives the rod has stopped working, replace the motor if possible.

Where are the bulbs in an electric fire?

Where Is The Bulb In An Electric Fireplace? The bulb in an electric fireplace is typically located within the center of the unit. The access cover, typically located at the back of the unit, will need to be removed in order to reach the bulb.

How do I find my Dimplex model number?

The product model number can be found on the top of the unit, on the right hand side, behind the control unit.

How do you change the bulb in a valor fire?

At the rear top of the heater, there is a hinged access panel. Unscrew and remove the locking screw—see figure 23. The light bulb is located into a cradle on the rear of the access panel. Open the access panel and remove the bulb.

Where are Dimplex fires made?

From basic models to exclusive premium appliances incorporating Opti-Myst or Optiflame technology, all Dimplex electric fires & stoves are manufactured in the UK to the highest of standards.

How does flame light bulb work?

These bulbs average 100 LEDs, which are mounted on a sheet of flexible plastic, which is in turn attached to an aluminum cylinder with thermally conductive tape. … The LED controller fires the LEDs in patterns that simulate the rising flames of a fire to produce a flame-like effect.

Can you replace the heating element in an electric fireplace?

Can You Replace The Heating Element In An Electric Fireplace? In many cases the heating element can’t be changed within an electric fireplace. However, the heating element may be able to be changed in certain models of electric fireplace.

Why won't my electric fireplace light up?

A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary. Try another wall socket.

Article first time published on

What makes the flames in an electric fireplace?

Typically, the light from a Light Emitting Diode (LED) reflects off of a spinning light refractor made up of three-dimensional patterns. This reflection creates the illusion of flickering flames and the glow of fire within the fireplace. … This warmth also adds to the realistic look and feel of the flames within.

Why does my Dimplex fire keep turning off?

Overheating. An electric fireplace will automatically shut off when it starts to overheat. This is to prevent to the unit from overheating causing damage to the fireplace itself, or becoming a fire hazard for your home.

How do I reset my Dimplex fireplace remote?

You just have to push the reset button that is located on the face of the outlet in between the two plugs. If your electric fireplace is plugged into an outlet that is controlled by a wall switch, make sure the wall switch is flipped to the ON position.

How do you unlock a Dimplex heater?

To lock the controls press and hold both the Back button and Enter for three seconds. Child Lock will appear at the bottom of the screen. To unlock the control repeat the action by pressing both the Back button and Enter for three seconds.

Who makes Dimplex fires?

The Dimplex brand is part of Glen Dimplex Consumer Appliances Europe. They manufacture electric fires and wood stoves. Our company is part of the Irish Glen Dimplex Group.

Who makes Dimplex?

Dimplex is a subsidiary of Glen Dimplex Heating & Ventilation (GDHV), a division of the Glen Dimplex Group, the world’s largest electrical heating business.

What is the most realistic electric fire UK?

Radia Flame 3D.
RadiaFlame with Omniglide.
Celsi 3-Sided Electriflame VR.
Celsi Puraflame.
Celsi Ultiflame VR.
Dimplex Optiflame.
Dimplex Opti-myst.

What is Dimplex Optiflame?

The Optiflame effect is a patented technology that simulates the illusion of flames emanating from the center of an enhanced depth fuel bed, generating an illusion of a real fire in the hearth.

How do you remove an electric fire surround?

To start removing one of these fireplace surrounds, you will have to chip away the plaster around the edge of the mantelpiece. This should reveal the lugs holding it to the wall. You can then go about removing the screws, which should start to release the surround from the wall.

How do you clean an electric fire?

Turn off the unit.
Remove or open glass doors.
Dust your logs, stones, andirons or hearth with a clean cloth. …
Vacuum vents with a hand vacuum or hose attachment.
Use a duster or damp clean cloth to wipe down the inside and outside of your fireplace walls.

Can a heating element be repaired?

Heating elements are relatively simple. … Heating elements can break and burn out, sag, and become misshapen. Most elements cannot be repaired, but they usually can be replaced. If you can’t remove the heating element to replace it, you’ll probably need to replace the entire appliance.

How do you remove an electric fireplace insert?

To remove an electric fireplace insert, check for any connections holding the insert in place and remove them, and pull the electric insert out of where it currently sits until the electrical connection can be seen. Unplug the electric insert from the outlet and pull the electric insert out completely.

Can LED bulbs catch fire?

Because of this, LEDs produce far less heat than other light bulbs, and heat is how fires start. … Therefore, though an LED might feel warm to the touch, it is extremely unlikely that an LED would start a fire.

How long do LED flame bulbs last?

LED flame light bulbs last up to an amazing 50,000 hours or more (some have a reported life span of up to 100,000 hours)! They save up to 90% of the electricity used by other types of flame light bulbs, using a mere 1.8 watts of energy to produce 150 lumens of light.

How does LED flame effect work?

When the lights are switched on, a rod with angled pieces of reflective plastic start rotating just behind the lights at the back of the fireplace. Light is then reflected off the angled reflective pieces from the bulbs or LEDs, and onto the backing screen to produce the effect of flames.

How long do electric fireplaces last?

Electric fireplaces can last for 10-20 years depending on how frequently they are used. Many manufacturers offer warranties ranging from 1 year to 10 years depending on the model.

Why is my electric fire blowing cold air?

An electric heater that blows cold air could be caused by one or more of the following reasons: The manual reset has tripped. The fan switch is “on” and the thermostat setting is below the actual temperature. The fan is dispersing this air after shutdown.

How does a Dimplex fireplace work?

Electric fireplaces work by drawing in cool air, heating it internally using a heating coil and gently forcing the warmed air back out into the room by way of a fan. Some electric fireplaces also use infrared technology which directly heats objects within a room.

What is the most realistic electric fireplace flame?

1.) Dimplex Revillusion Built-In Firebox (43.25”)
2.) Dimplex Prism Wall Mount Fireplace (74”)
3.) Dimplex Optimyst II Insert (28”)
4.) Dimplex Opti-V Duet Fireplace Insert (54.25”)
5.) Dimplex Ignite XL Linear Electric Fireplace (100”)

Is it safe to leave an electric fireplace on all night?

Yes, it is okay to leave an electric fireplace insert on overnight but it’s best if you turn it off when possible. … Although electric fireplaces do not produce any carbon monoxide fumes, its best to turn your electric fireplace off when you leave the room for an extended period of time or plan on catching some zzz’s.

Why does my gas fireplace shut off after 20 minutes?

If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.