How do you install a mulch kit on a John Deere x350

Step 1: Remove the cutting deck. … Step 2: Flip the deck over. … Step 3: Secure the old blades. … Step 4: Remove the old blades. … Step 5: Attach new blades. … Step 6: Flip the deck back over. … Step 7: Install the mulch plug. … Step 8: Reattach the deck to your mower.

How do you install a mulching kit?

Step 1: Remove the cutting deck. …
Step 2: Flip the deck over. …
Step 3: Secure the old blades. …
Step 4: Remove the old blades. …
Step 5: Attach new blades. …
Step 6: Flip the deck back over. …
Step 7: Install the mulch plug. …
Step 8: Reattach the deck to your mower.

What does a John Deere mulch cover do?

What is a John Deere Mulch Control Kit. The John Deere One-Touch Mulch Control Kit allows you to go from mulching to side-discharge with one adjustment so you can mow each area of your lawn without interruption. This allows you to keep clippings out of your driveway or flower bed.

Which way do you install mulching blades?

If it has the word “Bottom,” or a model number printed on it, that side of the blade faces the ground when the mower is upright. If there are no markings, check the blade’s bevel. The beveled portion must face away from the ground when installed. The bend in mulching blades also must point away from the ground.

Are mulching kits worth it?

A mulching kit will only do good when it is dry or when the grass hasn’t grown a lot. If you are expecting for the clippings to just go away then you need to rethink a mulching kit. They work on a smaller mower like a push mower because you aren’t covering as much ground as fast and the grass gets chopped up much more.

Which side of a mulching blade is the cutting edge?

The cutting edge of a mulching blade has points on one side. This points should face the sky. If your blade does not already have a sticker or etched words indicating which side is up or which side is down, we suggest you add a sticker and label it.

What's the difference between mulching blades and regular blades?

Standard blades, sometimes referred to as 2-in-1 blades, are designed to cut grass and then either discharge or bag the clippings. … Mulching blades, also known as 3-in-1 blades, can be used to bag, discharge, or mulch grass clippings. Mulching blades feature more curves and an increased cutting edge.

What do John Deere mulching blades look like?

One end of the rectangular blade is smaller than the other, though both have a straight, blunt edge. … The midsection of the blade has an upward curve and a star-shaped hole in the middle where it attaches to the mower. Some third-party mulching blades that are intended for John Deere mowers are designed differently.

Can I use mulching blades with side discharge?

Mulching mowers aren’t different from other mowers in most ways. … Mulching blades are sometimes called “all purpose” or “3-in-1” blades because you can use them to mulch, bag, or side discharge. Standard blades are called 2-in-1 blades because you can use them to either bag or side discharge the grass.

Are John Deere mower blades reverse thread?

Yes and no. The lawnmower blades itself is not threaded, but most nuts that held the blade in place are reverse threaded. The reverse thread helps to secure the blade on the drive shaft such that the rotation of the blade does not loosen the nut.

Article first time published on

What is mulch on demand John Deere?

The John Deere Mulch On Demand deck lets you switch between mulching and side-discharging without ever leaving your seat. Save time and money by keeping clippings off of sidewalks and driveways and out of mulch beds.

Are John Deere decks interchangeable?

So, are lawn mower decks interchangeable? Lawnmower decks are largely interchangeable. Engines will swap without issue. However, blades and drive systems may differ.

What is a John Deere 7 iron deck?

Since 1998 the 7-Iron mower deck has demonstrated commercial quality, performance, and durability. The 7-Iron II mower deck delivers an even higher-quality cut in even more diverse conditions. The 60-in. and 72-in. 7-Iron II side-discharge decks are suited for trimming, grooming, or other material mowing jobs.

What does a mulch kit do on a zero turn?

This specialized non-discharging baffle and blade kit recuts grass clippings into a fine mulch, eliminating cleanup time and returning rich nutrients back to your soil for a naturally lush lawn. …

How much is a mulch plug?

This item Husqvarna 532166649 Mulch PlugHusqvarna 532402574 Grass Clippings DeflectorAdd to CartCustomer Rating4.3 out of 5 stars (139)4.4 out of 5 stars (232)PriceFrom $47.13$1398Sold ByAvailable from these sellersMPartsman

Why is mulching done?

Benefits of Mulching: Mulching helps to retain soil moisture, so less amount of water is required during irrigation. Mulch directly conserves water. It traps surface water of the soil that would otherwise get evaporated quickly. Mulching helps to regulate soil temperature, which is beneficial for proper root growth.

What does a mulch plug look like?

The Mulching Plug will be either yellow or black in colour and can be located by lifting the deflector plate at the back of your mower as shown below in fig 1. All our Mulching Plugs are very similar and their location, installation and removal, as a result this guide covers all our walk behind lawnmowers.

Is bagging better than mulching?

Some homeowners feel that bagging the lawn creates a cleaner appearance and better curb appeal because no clumps of grass are visible. If you tend to mow less frequently and your clippings are long, it’s best to bag them. … Successful mulching requires that the grass is chopped into little pieces.

What is a mulching attachment?

A mulching kit is basically a way to convert your tractor or push lawn mower into a mulcher. … This eliminates the need to rake, collect and bag your leftover lawn clippings. Mulch kits are available in models that are suitable for both riding or tractor-style mowers as well as standard push mowers.

Is mulch good for grass?

Mulching grass clippings provides more nutrients for your soil. As they break down, the clippings will release nitrogen, potassium, and phosphorus. These are essential nutrients that your lawn needs to stay healthy. … There is great value in mulching grass clippings instead of bagging them.

Do John Deere need high lift blades bagger?

Registered. The high lifts are required for baggers where there isn’t any active air flow to get the clippings into the bagger.

Which way do Blades go on John Deere?

Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.

Is mulching better than side-discharge?

No. Both side-discharge and mulching mowers leave grass blades behind. However, a mulching blade chops up clippings into finer pieces so they decompose faster and don’t clump as quickly. Using a side-discharge mower you may need to do your own mulching by running over your grass piles multiple times.

Should I use a mulch plug?

A “mulch plug” is necessary to mulch the grass clippings during mowing. The plug is used to close the discharge opening in the mowing deck and recycle the lawn clippings back into the blade area for repeated cutting and eventually deposited into the lawn as fine mulch.

How does a mulch plug work on a lawn mower?

The mulching function on a lawn mower is activated by simply inserting a mulch plug into the discharge chute which prevents the cut grass from leaving the mower deck and entering the grass collector. This results in the cuttings being circulated within the deck and cut up into very fine pieces.

Can you mulch with a riding mower?

Using a mulching riding mower not only helps save time and money, but it also leaves your lawn looking pristine and healthy. These kinds of mowers are equipped with mulching blades for leaves, or you may have to purchase a mulching kit to use separately.