How do you light a blue flame log

1. Light the burner by using a long fireplace match or a lit paper under the center of the lighter near the burner ports. 2. Turn the gas valve ON gradually until burner ignition occurs.

How do you light a blue flame?

Make blue fire either using a fuel that burns blue or else by adding a metal salt that emits blue light to a flame. You can make blue fire for a chemistry demonstration, Halloween decoration, or “magic” trick. While many fuels burn blue, you need a flame colorant to get a vivid blue flame.

Does blue flame produce light?

The spectrum of a premixed (complete combustion) butane flame on the right shows that the blue color arises specifically due to emission of excited molecular radicals in the flame, which emit most of their light well below ≈565 nanometers in the blue and green regions of the visible spectrum .

How do you light a log lighter?

Just set the logs on the wood grate over the log lighter, turn the key to open the gas line, toss in a lit match, and the fire lights around your logs. After the logs have caught on fire, turn the valve key to close the gas line, and enjoy the crackling wood fire before you.

What is a blue flame in a fire?

A blue flame means complete combustion of the gas. With complete combustion, LPG (Propane) burns with a blue flame. Pure hydrocarbons like methane (refined natural gas), propane, butane and ethane gases also burn with a blue flame. … These gases come from raw natural gas processing and oil refining.

Should pilot light always be on fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. … If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

Can you manually light a gas fireplace with electronic ignition?

It’s easy to know how to turn on a gas fireplace with an electronic ignition wall switch. Many gas fireplaces come equipped with a wall switch control panel for activating the unit and adjusting the level of the flame. Simply push the “On” button and the pilot should ignite.

How do you light a Bunsen burner?

1. Check connections to burner and desk outlet valve.
2. Close needle valve and collar.
3. Open desk outlet valve fully.
4. Open needle valve 1/2 turn.
5. Use the spark lighter to light the flame.
6. Adjust collar and needle valve till you see a blue flame.

Can you light gas logs with a lighter?

Light a match or butane candle lighter and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. … Keep in mind that while gas fireplaces are safe when used properly, you need to turn off the valves and call a professional for help if you notice a heavy smell of gas when its in use.

What can produce a blue flame?

You get a blue gas flame with a hydrocarbon gas when you have enough oxygen for complete combustion. When you do have sufficient oxygen, the gas flame appears blue because complete combustion creates enough energy to excite and ionize the gas molecules in the flame.

Article first time published on

Is blue fire hotter than the sun?

The sun is much hotter than fire. The sun is in a state of thermonuclear reaction. This produces radiation across the visible spectrum, which we call white, as well as radiation across a much wider band. That is, the sun is indeed blue, as well as all the other colors.

What Colour should a gas fire flame be?

Healthy Flames A healthy gas flame will burn steadily with a yellow or orange. If the flame is not yellow or orange it may be a sign that your gas fireplace needs adjusting or cleaning, which should be done by a qualified technician, such as those we have at Kozy Heat.

Why is gas fireplace flame blue?

Gas fireplaces have blue flames because their flames are hotter than the traditional orange and yellow flames. The blue flames being emitted from your fireplace are evidence that your gas is being burned properly and everything is combusting as it should.

How do you get a blue flame on a gas stove?

On most stoves, the air shutter is just behind the burner gas valve. It is a sliding plate or tube that covers the burner air vent. Loosen the set screw that keeps the shutter from moving. Turn the burner on fully and slowly open the shutter until the flame turns blue.

How do you light a non vented gas log?

Lighting your pilot Push in knob (this releases the gas to the pilot area only). With control knob in, push the piezo ignitor in continuously until pilot ignites (every 3-5 seconds). Once pilot flame is lit*, keep knob pushed in for 60 seconds. Release knob if pilot stays lit (If not, go back to step 3 and repeat).

Do gas logs work without electricity?

Gas & wood fireplaces will continue to work safely during a power outage. These fireplaces do not require electricity for venting and can be used safely during a power outage.

Should I turn off the pilot light on my gas fireplace in the summer?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

What is match light ignition?

The traditional method to igniting a fireplace, a match lit ignition system requires the flames be lit manually by holding a matchstick or a long lighter near the burner before opening the gas valve. … A match lit ignition system has little to no moving parts, meaning less maintenance is required.

How do I put logs in my gas fireplace?

1. Place the largest ceramic logs on the bottom to serve as the foundation for the fire. …
2. Leave 2 inches (5 centimeters) between logs.
3. Make sure none of the logs is blocking the gas flow. …
4. Arrange smaller logs on top of the foundation logs.

Does a pilot light give off heat?

Although the flame from a pilot light is small, it’s still heat. Depending on where you live, you might not want any extra heat being generated inside your home during the blazing summer months. A pilot light means heat, and it also means fuel usage.

Can a pilot light start a fire?

When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light. … If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.

How much heat does a pilot light give off?

Just how much gas does a pilot light consume? Most pilot lights will consume about 600 BTU’s of gas/hour. With 24 hours in a day, that’s roughly 14,400/BTU’s each day.

What is the wall switch for on a gas fireplace?

The wall switch of a gas fireplace works protects the gas valve from accidentally turning on. It is a safety measure associated with a pilot flame and a thermopile.

Why is my propane fireplace not lighting?

If your fireplace has a conventional pilot light: Step 1 – Check the main valve to make sure the gas is turned on. … Step 3 – If gas is coming out of the pilot, but it still won’t light, clear away any gunk sitting between the igniter and thermocouple using a can of compressed air.