How does deep fill work on GE washer

If your Samsung Top Load washing machine has the “Deep Fill” option, this can be a useful trick for super heavy and/or soiled loads. This setting adds extra water to the drum to ensure every item is saturated before washing.

What does Deep Fill mean on washing machine?

If your Samsung Top Load washing machine has the “Deep Fill” option, this can be a useful trick for super heavy and/or soiled loads. This setting adds extra water to the drum to ensure every item is saturated before washing.

How do I reset my GE deep fill washing machine?

1. Unplug the washer for 1 minute from the electrical outlet.
2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. …
3. The motor has now been reset and is ready for you to start a cycle.

How does GE Precise fill work?

We offer Precise Fill (may be called Auto Load Sensing) on washers with an agitator or infusor. Precise Fill allows the washer to determine the optimum water required to wash the items in the basket. To use this option properly, follow proper loading instructions and keep the lid closed during the wash cycle.

What is the deep rinse cycle on a GE washer?

Deep Rinse – Ensure clothes are thoroughly rinsed free of detergent, fabric softener and other additives. 2nd Rinse – Ensure removal of detergent, bleach and other additives with an optional extra rinse after the wash cycle.

How long do ge top load washers last?

Traditional top load washers last between 10-12 years, so the need to update was really only because the ole’ washer finally gave up. And it is this reliability that keeps people loyal to top load washers.

How much should you fill a washing machine?

The general rule of thumb is that you should add clothes until the machine is about two-thirds full. That’s two-thirds of loosely packed clothes, so don’t try to pack as many clothes as you can in that area either.

What does H2O supply mean on a GE washer?

If the Fill light is flashing or H2O SUPPLY is scrolling on the display (2015 and newer models), the washer will initiate a 3 or 4 minute lock-out period (depending on the model). The washer controls won’t respond or change during this time. … Unplugging the washer will start the 3 or 4 minute lock-out period again.

Why does my washing machine not fill up all the way?

If your washer doesn’t fill with water, first check that the house water supply to the washer is on. If it is, and the washer won’t fill at all, the inlet valves might have failed. If the washer fills partially, the problem is likely with the temperature selector switch or water-level pressure switch.

Why won't my GE Deep Fill washer spin?

If your washer won’t enter the spin cycle, check that the load is properly balanced. … Clean the filter of any debris and then replace it, reassembling the washer. A clogged household drain can also cause water to stand in the washer and prevent the spin cycle from starting.

Article first time published on

Why is my GE washer not spinning clothes dry?

When your washer will not spin dry your clothes, the debris filter or coin trap may be blocked. Your washer has a filtering device down and near the pump called a drain filter or a coin trap. … The drain filter is accessed on the front bottom of the washer and the coin trap is located behind an access panel.

What is a deep water rinse?

Deep Water Wash For heavily soiled casual and mixed loads. Items could include towels, jeans and sturdy fabrics. This is only available on top load washers.

How do you run the rinse cycle on a GE dishwasher?

RINSE CYCLE Do not use detergent. Detergent is not dispensed during the rinse cycle. Press the SELECT CYCLE button until you see RINSE on the display. Cycle time: 16 minutes.

Do you pour detergent directly on clothes?

No, You can not pour laundry detergent directly on your clothes. … If you have an HE washer or a standard front-loading washer, it should have a special compartment for detergent. If laundry detergent does not dissolve completely in water It will damage the fibers of your clothes. Can You Pour Laundry Detergent Directly?

How do I know when my GE Smart Dispense is empty?

You can determine this by looking at the tank level indicator lights. If the only light on is the single red light at the bottom, then the tank is empty. If the Bulk Dispenser is the issue, add more detergent and/or fabric softener to the tanks.

Does Laundry Detergent go in the middle?

It all depends. If you have an HE front-loading washer, it should have a special compartment in which to pour the detergent. If you have a regular top-loading machine, it’s best to fill your washer with water first, then add your detergent, then add your clothes.

How do you know if your washer is overloaded?

By placing your hand into your machine’s drum, you can see how much space is left. Perfect is if you can fit nothing else in the drum, just your hand and your wash. If you can’t get your hand into the drum, then it’s overloaded.

Can a washing machine leak if overloaded?

The washer can leak if it is overloaded or out of balance. Check to be sure the washer is level, reduce load sizes, and keep an eye out for the leak. … If you have a washer that features a spray rinse function, interfering with the cycle by manually advancing the timer can cause the washer to leak.

What happens if you put too many clothes in the washer?

If you overload the washing machine, clothes won’t be free to move around and get clean, because they can’t be properly soaked in water and laundry detergent. In addition, when you overload your washing machine, the washer adds extra stress to the motor and the tub bearings and you could damage your appliance.

What is the life span of a GE washing machine?

A GE machine may last longer than a Kenmore and, yet, it may not. The range is more specific with a GE, and you can expect to get 11 or 12 years out of a machine.

How much water does a GE top load washer use?

Traditional Washing Machine Water Usage Traditional washing machines use almost twice as much water as newer, front-loading or high-efficiency models, such as a GE HE washer or Maytag 4.2 Top-Load Washer. If you have an older or top-loading washer, you can expect to use between 30 and 45 gallons of water per load.

Does GE make a good top load washer?

GE makes both the top load as well as front load washers. The company has innovative features for both. Front load washers tend to be favored since they are gentler on your clothes and more efficient.

How does washing machine detect load?

By reading resistance through the motor. It already knows how heavy the basket it, so it will spin the clothes and see the resistance from the motor, how long the basket spins, and how much energy is required to make the basket stop moving.

Why does my GE washer say Tank low?

“Tank Low” will display when the SmartDispense tank needs to re-filled. Typically, this first lights up when there are approximately 8-10 loads of detergent remaining. “Loads Left” displays the estimated number of wash loads left for the amount of detergent in the SmartDispense tank.

What does sense mean on a GE washer?

The Sensor Wash feature senses the incoming water temperature and automatically adjusts the water temperature to the selection you have chosen.

Can you reset a GE washing machine?

Unplug the washer for one minute, then plug the washer back into the electrical outlet and lift and lower the lid six times within 12 seconds. This will reset the motor and you should be able to start the cycle.

How do you force a GE washer to drain?

1. TURN OFF THE POWER. Unplug the washing machine from the power outlet.
2. REMOVE LAUNDRY. Take out any clothing that’s in the washer tub.
3. EMPTY THE TUB. Use a bucket to scoop the water out of the washer tub. …
4. MOVE WASHER AWAY FROM THE WALL. …
5. DISCONNECT DRAIN HOSE. …
6. PINPOINT THE ISSUE.

Why is my GE washer not spinning or agitating?

Common solutions for: GE Washer won’t spin or agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. … If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.