T
The Daily Insight

How much does it cost to get a window motor fixed

Author

Andrew White

Published Mar 08, 2026

The average time to replace a power window motor is 2.1 hours. That averages out to roughly $120 to $150 in labor time plus the cost of the motor itself. This can usually bring the entire job to a total of anywhere from $200 to $300, depending on make and model.

How much does it cost to fix a window that won't roll up?

Repair costs to fix a window that won’t go up can be $20 or less if you’re only dealing with a new fuse that you replace yourself. More complex repairs that involve dismantling the door to access the window motor can run $250 to $400 or more.

How do you know if your window motor is bad?

  1. It takes multiple presses to roll the window up or down.
  2. Window speed is slower or faster than usual.
  3. Clicking from the door when the window rolls up or down.
  4. Power window won’t stay up or is crooked.

How much does window motors cost?

Replacement aftermarket window motors may go from $5 to $855, depending on different inclusions and other variations. As for labor cost, it may average around $120 to $150, but could be higher depending on how long it takes to replace the part.

What causes the power window to stop working?

Window malfunctions are typically caused by a faulty window regulator (also called a window track), or a broken motor, cable pulley or window switch. … Power window issues can be intermittent or permanent. Intermittent problems can cause windows to stop working temporarily only to work again and have more problems later.

How do you fix a power window that won't go up?

  1. Check the window safety lock-out switch. …
  2. Check the fuses. …
  3. Push the window switch up and down and listen. …
  4. Push the window switch and watch the dash gauges. …
  5. Try the other switches. …
  6. Swap switches if possible.

Can a window motor Be Fixed?

In order to fix a power window motor, a trained technician will need to replace all faulty components by unbolting the broken parts and replacing them with new ones.

How do you know if it's the window regulator or the motor?

Power window goes down, but not up, the motor is not running when the switch is in “UP” position. Window motor runs but the window jams or doesn’t move: In this case, we know that the window switch, the wiring and the window motor work. That means the problem is with the window regulator.

What does it mean when your car window wont go up?

There are a multitude of reasons why your car window might not roll up, including: The fuses are blown, preventing the electrical controls handling the window from working. The child safety lock is engaged by accident. The window switch is functioning correctly, but the window motor has malfunctioned.

How much does it cost to fix a driver side window motor?

The average time to replace a power window motor is 2.1 hours. That averages out to roughly $120 to $150 in labor time plus the cost of the motor itself. This can usually bring the entire job to a total of anywhere from $200 to $300, depending on make and model.

Article first time published on

Why does my window go down but not up?

It might be as simple as a fuse or as complicated as the mechanism jammed and burned out the motor. If a window goes down but not up it is usually a bad switch. In that case you replace the switch. If you are a real redneck you might try taking the switch apart and cleaning the contacts.

Does each power window have its own fuse?

Check the fuse Most window circuits are protected by a fuse or cutout in the supply line and this is the first place to check if the windows refuse to operate. … Other cars have individual fuses for each window motor so failure will only affect the one window.

How much does a window fuse cost?

The cost to have a fuse replaced depends on the style of fuse used in the make and model, and the power requirement. Most common fuses are only $10 to $20, although some specialty fuses are more than $100 to replace, in addition to diagnostic costs.

How can you tell if a window fuse is blown?

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Can you rebuild a power window motor?

In some cases, a power window motor can be repaired and doesn‘t require replacements, thus saving YOU money! When the problem stems from broken plastic or rubber inside the window motor casing, Power Window Repair can often replace or repair those parts, giving your power window motor new life for years to come.

Can you manually roll up a power window?

Hold the window shutter from the top and bottom and then take out the props supporting them. Tighten back the nuts that hold the window back to the regulator ledge. Ensure that you fasten the screws well. Then, place your hands beneath and above the window and pull it up as high as you can.

What does a bad window regulator sound like?

If the window is able to move and you hear strange noises, this could be an early warning sign of a failing regulator. The noises may sound like grinding, clicking, or chattering.

Can a fuse stop a window from working?

A blown fuse is a common cause of a window being stuck. … This does not mean that all electronics in your vehicle will stop working, as most modern cars will have many fuses—one might cover audio and speaker systems, another might control windows and lights. This problem can be fixed quickly by replacing the fuse.

How much does a blown fuse cost?

Cars run on electricity as well as gas, and almost all of it runs through fuses. Learn where they are, how to spot a blown fuse, and how to replace them. It takes about five minutes, costs about $1, and it’ll save you the hassle of a trip to the repair shop.

How much does it cost for a new fuse?

There are packs of three costing $5 to $10 for the standard 15- to 20-amp fuses. The cost for professional installation should be at least $100. It can be difficult to find older circuits and fuses.