How much is a yard of 3000 PSI concrete

PSI MixPrice Per Cubic Yard Delivered3,000 PSI, 6.0 Sack Mix$1243,500 PSI, 6.5 Sack Mix$1264,000 PSI, 7.1 Sack Mix$1295,000 PSI, 8.5 Sack Mix$147

What is 3000 psi concrete used for?

The residential workhorse of concrete, 3,000 PSI can be used for driveways, patios and sidewalks. Its durability will help shrug off the freeze-thaw cycle of harsh winters. This is a fine choice for any general construction use.

Is 3000 psi concrete good for foundation?

Contractors often use 3,000 PSI concrete – which is sturdy and lasts long – in general construction. This type of concrete can be used while damp. Concrete with PSI levels exceeding 3,500 is used for construction of foundations and floor slabs.

What is the cost of 1 yard of concrete?

The average cost of a yard of concrete in the U.S. is between $113.00 and $147.00. Prices vary depending on what PSI strength you order. A cubic yard of concrete covers 81 square feet at 4 inches thick. The cost of concrete for a 4″ slab costs between $1.40 and $1.80 per square foot.

Is higher PSI concrete more expensive?

A higher psi means a given concrete mixture is stronger, so it is usually more expensive. But these stronger concretes are also more durable, meaning they last longer.

What is the mix for 3000 PSI concrete?

THIS GIVES YOU A BASIC 3000 PSI CONCRETE MIX RATIO OF: 1 PART CEMENT. 3.25 PARTS STONE. 2.93 PARTS SAND.

How long does it take 3000 PSI concrete to cure?

Concrete typically takes 24 to 48 hours to dry enough for you to walk or drive on it. However, concrete drying is a continuous and fluid event, and usually reaches its full effective strength after about 28 days.

How much does it cost to pour a 24x24 slab of concrete?

A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

How many yards of concrete do I need for a 24x24 slab?

For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

How many square feet is a yard of concrete 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

Article first time published on

Does higher PSI concrete crack less?

Higher psi concrete will resist cracking more but without addressing the cause of the stress cracks sooner or later the cracks will appear. Addressing cracking in concrete slabs is done long before the mix is poured.

How much weight can a 4 inch concrete slab hold?

Typically we like to limit the weight to about 40 lb/sqft on an unknown 4″ slab. In most cases you can go to 80 lb/sqft in isolated spots, but unless you know roughly what the soil bearing and reinforcing is for that slab you might be looking at cracking.

How thick should driveway concrete be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

How much does a yard of 3500 PSI concrete cost?

PSI MixPrice Per Cubic Yard Delivered2,500 PSI, 5.5 Sack Mix$1223,000 PSI, 6.0 Sack Mix$1243,500 PSI, 6.5 Sack Mix$1264,000 PSI, 7.1 Sack Mix$129

What is 8000 psi concrete used for?

It is estimated that a 50-story structure with 4-foot diameter columns using 4000 psi concrete can reduce column diameters by approximately 33% by using 8000 psi concrete (Peterman). High –strength concrete is occasionally used in the construction of highway bridges.

What is 6000 psi concrete used for?

PRODUCT USE PSI 6000 can be used for any application requiring concrete in a minimum thickness of 50 mm (2”), such as slabs, footings, steps, columns, walls and patios.

How long does it take 3500 PSI concrete to dry?

But to answer the question of, “How long does concrete take to set?” concrete setting time is generally 24 to 48 hours. At this point the neighborhood dog will not leave his footprints in it, but you should keep it clear of heavy equipment during this time period. Most mixes are cured at 28 days.

How long does it take concrete to reach 3500 psi?

Specified concrete compressive strength is the minimum compressive strength at which the concrete should fail in standard tests of 28-day-old concrete cylinders. A typical concrete compressive strength specification requires 4,000 to 5,000 psi at 28 days.

How strong is concrete after 3 days?

AgeStrength per cent1 day16%3 days40%7 days65%14 days90%

What is 4500 psi concrete used for?

For both interior floors and garage floors, the minimum strength recommendation is 2,500 psi, however, similarly to slab projects, an ideal standard is 4,500 psi, especially for garage floors which must sustain much more wear and tear and heavy machinery.

What is a 6 bag concrete mix?

A six bag mix is a concrete mix that has six bags of portland cement in it. In general, the more bags of cement in a mix, the stronger the mix. Most mixes have 5 to 7 bags of cement. Some concrete contractors (usually the old timers) will order their concrete based on bags rather than psi.

What is the strongest concrete PSI?

Although there is no precise point of separation between high-strength concrete and normal-strength concrete, the American Concrete Institute defines high-strength concrete as concrete with a compressive strength greater than 6,000 psi.

How much does a 24x30 concrete slab cost?

A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.

How many yards of concrete do I need for a 10x10 slab?

The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.

How thick does a concrete slab need to be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How much is a 10 yard truck of concrete?

According to the NRMCA, a truckload (10 cubic yards) of concrete costs $1,150 to $1,450, depending on various factors such as your geographic location and the company you use. Ten cubic yards is enough to pour a driveway measuring 20 feet by 24 feet.

How much does a 30x50 concrete slab cost?

The base cost of material for a 30×50 concrete slab is between $2.83 and $5.47 per square foot. The total cost may range from $4,245 to $8,205. However, hiring a contractor may cost between $6 and $8 per square foot, bringing the price range to $9,000 to $12,000. The biggest cost is the material.

How much does a 2 car garage slab cost?

Concrete Costs It doesn’t include labor, supplies such as reinforcing bar, if needed, or building permit fees. At the time of publication, the average cost of concrete for a 400-square foot slab, the typical size for a two-car garage, ranges between $583 and $637 or between $1.46 and $1.59 per square foot.

How much does 2 yards of concrete cost?

Cubic YardsPrice Range1*$140 – $2002*$280 – $4003*$420 – $6004*$560 – $800

How many bags of concrete do I need for a 8x10 slab?

Regarding this, “how many bags of concrete do I need for a 10×8 slab?”, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb of premixed concrete for a 10×8 slab, at 5 inches thick slab, either 73 bags of 60lb or 56 bags of 80lb premixed concrete are required, while at 6 …

How much cement do I need for a 12x12 slab?

Regarding this, “how many bags of concrete do I need for a 12×12 slab?”, at 4 inches thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete for a 12×12 slab, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at …