What does ETL Listed mean for lighting

What is a ETL listing? ETL is another electrical safety certification. It’s doled out by Electrical Testing Labs, which is operated by Intertek. ETL tests products to the same safety standards as UL. Like with UL, an ETL mark signifies a product’s safety for the public.

What does ETL mean on lights?

An ETL certification means that products have been tested to set safety standards. The certification comes from Intertek’s Electrical Testing Labs. … It’s common for lighting products to have an ETL mark as it’s usually easier and quicker to get than a UL certification.

What is the difference between ETL and UL listed?

The main difference between UL and ETL listed products is that ETL doesn’t create its own standards for certification. UL develops standards that are used by other organizations, including ETL. … Additionally, they are recognized by OSHA as being suitable labs to test products based on safety standards.

What does ETL listing mean?

The ETL Listed Mark indicates to distributors, retailers and customers that your product has been tested by Intertek and found in compliance with accepted national standards.

Do lights have to be UL listed?

The National Electric Code (NEC Section 411) requires that low voltage lighting equipment is UL listed for the purpose. This means that all electrical components (fixtures, wire, and transformers) carry UL Listings. An electrical inspector may fail landscape lighting projects that contain non-listed products.

What does ETL Listed Wet mean?

Fixtures that are UL or ETL wet-listed are designed to endure wet outdoor conditions and inhibit water on live parts or other electrical components for a safe and long lasting installation.

Is ETL recognized in USA?

ETL is recognized as an NRTL in the United States and, in a similar capacity, as a Testing Organization and Certifying Body in Canada by the Standards Council of Canada. A product bearing the ETL Listed Mark is determined to have met the minimum requirements of prescribed product safety standards.

Is ETL the same as NSF?

The ETL listing mark means that the initial certification testing and follow up inspections are performed by Intertek; the UL listing mark means that the initial certification testing and follow up inspections are performed by Underwriters Laboratories (UL); the NSF listing mark means that the initial certification …

Is ETL OSHA approved?

While UL has become one of the more recognized and referenced product safety marks, both UL and ETL testing procedures have been accredited by OSHA to issue safety marks, as well as many of the other international organizations responsible for establishing safety standards.

Is ETL recognized in Canada?

The ETL Listed Mark and C-ETL Listed Mark are accepted throughout the United States and Canada when denoting compliance with nationally recognized standards such as ANSI, IEC, UL, and CSA.

Article first time published on

Is ETL equivalent to CSA?

ETL is currently a division of Intertek Testing Laboratories. Intertek ETL is, like UL or CSA, an OSHA recognized NRTL, Unlike UL or CSA, ETL does not publish their own standard, instead, they test parts and components to the published standards of other NRTL’s, including ASME, ASTM and of course CSA and UL.

What if a product is not UL listed?

Just because a product is not UL recognized and tested doesn’t mean it’s going to spontaneously combust. It simply means that its performance and safety haven’t been tested independently and verified to meet those safety standards.

Are LED lights UL approved?

When an LED lighting product is submitted for UL testing, it is assessed for any public safety risks, including the risk of overheating, electric shock and fire. Energy Focus LED lighting products have gone through this testing process to make sure our LED lighting exceeds the highest safety standards.

What does covered ceiling mount only mean?

Covered Ceiling Mount Only — these luminaires are only approved for water contact on the front side and not the backside. … Suitable for Ground-Mounted Recessed — a fixture with this marking is approved for use below ground level and can safely be immersed periodically by precipitation.

Is a shower a wet or damp location?

Indoor locations like showers are also considered wet locations. If an area can have water splash or flow with direct contact to a light fixture, then it is considered a wet location. Most of Dutton Brown Design’s light fixtures are UL Listed for dry locations.

How do you know if a light is damp rated?

In the bottom right, you’re able to see a bar and a blue circle, which helps indicate the damp rating. This is important to pay attention to, especially if you’re purchasing light bulbs for areas that have a high amount of moisture.

What is the difference between ETL and ELT?

KEY DIFFERENCE ETL stands for Extract, Transform and Load while ELT stands for Extract, Load, Transform. ETL loads data first into the staging server and then into the target system whereas ELT loads data directly into the target system.

Is NRTL same as UL?

A: UL and ETL are both what are called Nationally Recognized Testing Laboratories (NRTL). NRTLs are in place to provide independent safety and quality certifications on products.

What is ETL Testing?

ETL — Extract/Transform/Load — is a process that extracts data from source systems, transforms the information into a consistent data type, then loads the data into a single depository. ETL testing refers to the process of validating, verifying, and qualifying data while preventing duplicate records and data loss.

Is ETL ANSI certified?

Intertek issues both the ETL Listed and ETL Sanitation Marks, which demonstrate compliance to North American product safety standards and required sanitation standards, respectively. … As an ANSI-accredited certification body, we test your products to applicable ANSI/NSF standards.

Is CSA equivalent to NSF?

CSA: Canadian Standards Association Primarily applicable in the Canadian market, CSA tests electrical and gas equipment (see CGA) and may serve as a substitute for NSF and UL certifications.

Is NSF certification required?

NSF requires the most specified certification and is so widespread that just about every new kitchen or restaurant will require NSF-certified products. Health Codes. Depending on your local health codes, certain pieces of equipment will most likely need to be NSF certified.

Is ETL Listed as good as UL listed?

None. Aside from the body that issues the listing, there is absolutely no difference between a UL listing and an ETL listing. Because Intertek ETL tests products to previously published UL Standards for Safety, products marked as ETL Listed meet exactly the same criteria as those marked UL Listed or UL Recognized.

Do all electronics need UL certification?

Having a UL listed certified unit is not legally required. It is, however, a common practice because many large companies will only buy equipment that has passed the UL safety tests. … Having a tested product shows that the equipment meets a nationally recognized safety standard.

How expensive is a UL listing?

How much does it cost to get a product UL certified? The fee, paid to UL, is often in the range between US$5,000 to 15,000.

What voids a UL listing?

Products on which UL Marks are allegedly misused. Products that cannot be installed in accordance with the appropriate model installation code. Products that do not appear to comply with the requirements used to investigate and certify them. Products that display a counterfeit UL Mark.

What is the difference between UL and LED lights?

The old UL standard was really a source of confusion for consumers and vendors of LED Christmas lighting products, because the newer LED product drew between 80-90% less power than the older incandescent lights, but UL still only approved the end-to-end connection of 3 light sets. …

What does UL Listed mean for lighting?

This marking, known as a UL listing, means the product has been tested by Underwriters Laboratories for fire safety and electrical safety. A UL lighting fixture is labeled to indicate the product has passed the specific safety requirements necessary to be used by consumers in their homes and in places of business.

Do low voltage devices need UL certification?

Technically speaking, cameras and other low-voltage devices do not require UL listing, as they fall under the limited power source (LPS) category in the NEC. … Instead, the power source, whether it be a low-voltage supply, midspan, or PoE switch, is to be listed.

What makes a fixture damp rated?

What are Damp-Rated Lights? Damp-rated lights are designed to withstand moist environments, specifically those where condensation may build up in and around the fixture. Damp-rated lights can go both outdoors and indoors. They withstand moisture but not direct contact with the elements.

What IP rating is damp location?

IP68 is for full, permanent submersion in water up to 13 feet. IP67 is for temporary submersion in up to 3 feet of water for no longer than 30 minutes.