What is the blue wire on a hunter ceiling fan

The blue wire on a ceiling fan is to control the power running to the light kit. The black wire is usually reserved for fan power only and does not extend over to your light kit. Without connecting the blue wire on your ceiling fan to a power source, you will not be able to control your lights.

What is the blue wire in a Hunter fan for?

The black wire from the ceiling fan is the hot wire that runs the motor and turns the fan blades. The white wire is neutral and completes the fan circuit. The blue wire is the hot wire for the ceiling fan light fixture.

What does the blue wire connect to in a light fixture?

If the light can be turned on or off from switches at each side of the room, you’ll see a blue wire that connects the electrical circuits for three-way switches. … These connect to the corresponding black and white electrical wires that run from the switch to the electrical box where the existing fixture is installed.

Can I connect blue and black wires together?

If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.

Is blue wire positive or negative?

The blue wire is negative while the white wire is positive.

What color wires go together for a ceiling fan?

The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. Copper or green wire is the ground wire and keeps your fan from experience power surges.

What is blue wire?

The blue wire is known as the neutral wire and its job is to take electricity away from an appliance. … Together, these two wires form a complete electric circuit.

Is brown or blue hot wire?

Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white. Green with yellow stripe is the ground and will go to the building green.

What does blue and black wire mean?

A blue wire may be connected to a negative terminal of the power source. … A blue wire should be connected to a positive terminal and a black wire should be connected to a negative terminal in a two wire system.

Is the blue wire a hot wire?

Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral. However, all electrical wires, regardless of their function, may carry an electrical current at some point and should be treated with equal caution.

Article first time published on

Where does blue wire go on light switch?

The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).

What Colour is the blue wire?

WireColourLiveBrownNeutralBlueEarthYellow and Green

Can a blue wire be live?

The blue wire, also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance. The combination of these wires is referred to as a circuit.

Is a black wire the same as blue?

The live wire is brown in new systems and red in old systems. The neutral wire is blue in new systems and black in old systems.

What are the new wiring Colours?

Old ColourNew ColourLive redLive brownNeutral blackNeutral blueGreen and yellow/bare earthGreen and yellow/bare earth

What color wires are positive and negative?

Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.

What do I do with the red wire when installing a ceiling fan?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

Where does blue wire go on ceiling fan?

The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.

Is brown or blue positive?

In a blue-brown system, blue is neutral and brown is “hot” or “line.” (AC wiring does not use the terms “positive” and “negative.”) If such wiring is used for DC, the brown would be positive. , Everything you see is fake, just a bunch of EM waves.

Does the blue wire go to white or black?

Connect the green wire to your household ground wire (copper/bare wire). Connect the black wires together. Connect the blue wires together or the blue wire to the black wire for lights. Follow the same step for ceiling fans without lights.

Does Blue Go to White or black?

Theoretically, the white wire is the neutral. The switch should come with a wiring diagram. One wire should be designated as “power in” or the “hot” (black or blue) The other wire should be designated as the “switch leg” or the wire to the load (black or blue)The third wire is the neutral (white).

What is the color code for electrical wire?

FunctionlabelColor, commonProtective groundPGbare, green, or green-yellowNeutralNwhiteLine, single phaseLblack or red (2nd hot)Line, 3-phaseL1black

Is Blue live on a plug?

In a plug, the live wire (brown) and the neutral wire (blue) are the two wires that form the complete circuit with a household appliance.

What do the colors mean in electrical wiring?

Electrical wiring comes in one of several colors: Black Wires – when you see a black wire, always assume it’s live. … Blue Wires – always assume they are live if you have power. Blue wires are also fed through a conduit, usually bringing power to three or four-way switches. Green Wires – green wires are grounding wires.

Which is live black or blue?

The blue is the hot wire for the lights and the black is for the fan; this allows them to be switched separately. (This color coding convention is specific to North America.) Also good to remember that it’s very important that the electrical box in the ceiling is rated to support a fan.