What kind of oil do you put in a Husqvarna chainsaw

The company recommends the Husqvarna XP Professional Performance brand of synthetic two-cycle

Can you use regular motor oil in a chainsaw?

Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. … If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.

Can I use any 2 stroke oil in my chainsaw?

Generic brand oils may not be designed to operate at the temperatures and rpm of modern two stroke chainsaws. … To ensure a long trouble free life out of your modern two cycle engine, we strongly recommend using only high quality two stroke oil designed for air cooled high performance engines.

Can I use SAE 10w30 in my chainsaw?

Can I Use 10w30 for Chainsaw Bar Oil? Yes, though it is not ideal for use in the winter. A 10w30 oil is multi-weight, meaning it will perform well in cold and heat. Yet 10w30 weight motor oil will be very tacky and viscous once the chainsaw heats up and starts to run.

Can I use 5w30 in my chainsaw?

Well you can get away with using 30 weight or 40 weight or 50 weight or 60 weight gear oil you can’t do it with 5W-30 the oil starts off as five weight and it’ll fall right off the chain it’s far too thin to use as chain and bar oil get yourself some 60 weight gear oil it’s dirt cheap.

What kind of oil can you use in a chainsaw?

Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.

What is the difference between chainsaw oil and motor oil?

Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.

Can I use 10w40 oil in a chainsaw?

You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.

Can I use 2 stroke oil as bar oil?

No, it is not. 2-cycle oil is a gasoline additive that provives lubrication to the internal engine parts since the engine has no oil internally. Bar and chain oil is a much heavier viscosity intended for lubrication of the bar and chain specifically.

Can you use vegetable oil chainsaw?

Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.

Article first time published on

Which 2 stroke oil is best for chainsaw?

Husqvarna XP+ 2 Stroke Oil – the Editor’s choice! Echo 6450002 PK6 2-Gallon Power Blend Oil Mix – the best for the volume! Lawn-Boy 89930 2-Cycle 32:1 Ashless Engine Oil – the best for hot temperatures! Stihl 0781 319 8015 High Performance 2-Cycle Engine Oil – the best for Stihl chainsaws!

What mix should I use for my chainsaw?

The general ratio for most two-stroke chain saw combustion engines is 50:1, though some manufacturers recommend 40:1. The larger number represents the amount of gasoline, while the smaller is the amount of oil needed.

What weight is bar oil for a chainsaw?

Similar to motor oil, chainsaw bar oil is available in various weights. The lightest oil is a 10W formula, while thicker oil may be up to 50W. A 30W chainsaw bar oil is generally considered standard for warm weather usage.

How much chain oil should a chainsaw use?

When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.

Can you use old motor oil for chainsaw bar?

Yes you can in a pinch, but motor oil is much thinner than bar oil and you will use it very fast. Chainsaw bar oil is thick and sticky and is designed to be used on bars and chains.

What happens if you run a chainsaw without bar oil?

No bar oil equals increased friction and heat. That adds up to a huge increase in chain and bar wear. Without bar oil, the chain teeth, drivers and links will all wear far more quickly. The increased friction can cause teeth to break.

What does 10W30 mean?

That’s why you see two numbers on most oils. For Example: 10W30. This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.

What can I use in place of bar oil?

Motor oil. If you find yourself in a situation where you need to use your chainsaw but you don’t have any of the correct oil, one of the obvious options is motor oil. …
Vegetable oil. …
Canola oil. …
Drained hydraulic fluid.

Can I use 4 stroke oil in a chainsaw?

Don’t use an oil mix in a 4-stroke engine If it is a 2-stroke engine and you forget the oil, you will damage the engine. However, if you have a 4-stroke engine, you should make sure you only use pure gas – otherwise, you will also risk damaging your expensive chainsaw.

Can you use olive oil in a chainsaw?

So, yes, olive oil is much better for you than “vegetable oil” (industrially processed seed oils). Engine oil works just fine. I’ve used motor oil as often as not, because I get it cheap by the case, for the same or less than I can get bar oil. Ten weight or ten W anything works fine.

Is a Husqvarna chainsaw 2 stroke?

All Husqvarna chainsaws use the ratio of 50:1, this means that for every gallon of gas you will use 2.6 oz. of 2 stroke engine oil.

Do you have to mix oil 2 stroke?

Unlike a four-stroke engine, whose crankcase is closed except for its ventilation system, a two-stroke engine uses the crankcase as part of the induction tract, and therefore, oil must be mixed with gasoline to be distributed throughout the engine for lubrication.

Is synthetic oil good for chainsaws?

“HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chain saws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-Cycle engine oils.

Is Stihl 2 stroke oil good?

Stihl 2-Stroke Oil The best practise is to use the Stihl Ultra 2-stroke engine oil as this is the cleanest of all the Stihl oils. This oil has been designed to improve the performance of your 2-stroke engine over a period of time whereas using other oils will see a slight decline in performance over a set period.

How do you mix amsoil 2 stroke oil?

RATIOOILFUEL50:12.6 oz.1 U.S. GALLON80:18.0 oz.5 U.S. GALLONS100:18.0 oz.6 U.S. GALLONS

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.