What Walbro carburetor do I have

Look at the upper front of the carburetor on the piece known as the airhorn, or choke tower. This is a rectangular part of the carburetor with rounded edges, open to the top of the part. There will be a small number stamped there.

How do I know what carburetor I have?

Look at the upper front of the carburetor on the piece known as the airhorn, or choke tower. This is a rectangular part of the carburetor with rounded edges, open to the top of the part. There will be a small number stamped there.

What is Walbro carburetor?

Walbro is a manufacturer of small-engine carburetors and their product lineup includes two-cycle, four-cycle and diaphragm carburetor models. The Walbro carburetor is commonly used on lawn mowers, chain saws and other equipment powered by small engines.

How do I identify my Walbro fuel pump?

How do I know what model Walbro carburetor I have? A: All Walbro carburetors have two or three letters stamped or cast on the carburetor body. Most have the two or three letters stamped near the fuel inlet fitting while some have it stamped or cast near the idle and high speed needles.

Where is the model number on a carburetor?

It’s like a “VIN” for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it.

How do I know what Rochester carb I have?

All Rochester carburetors, including the Quadrajet, are identified by a 7-digit or 8-digit part number; the earliest units, made before mid-1968, had a round metal tag attached to the fuel bowl. The 7-digit part number ran around the outside edge of the tag.

Where do I find my Walbro part number?

The Walbro part numbers and letters can be found next to the adjustment needles on some of our larger models like the HDA and HDB series carburetors, and near the fuel inlet fitting on our WT and WA series.

Are Walbro fuel pumps universal?

One of the most famous and widely of Walbro’s universal external pumps is the GSL392 255LPH High Pressure fuel pump. The GSL392 has been extensively used for High performance and Racing applications, and is the most popular universal external pump.

How do you measure a carburetor?

Measure the opening of the body on the intake manifold side in mm. That will equal the model number like Mikuni VM26 = 26mm bore.

How long does a Walbro fuel pump last?

Walbro fuel pumps should last between 10-20 years.

Article first time published on

Is Walbro carburetor still in business?

Initially a small engine carburetor manufacturer, Walbro now has a separate subsidiary which focuses on small engine fuel systems–Walbro Engine Management–and another subsidiary for automotive systems–Walbro Automotive. … Walbro was founded by Walter E. Walpole in 1950 in Fenton, Michigan.

Where is Walbro carburetor made?

Walbro has significant sales, R&D, and production capabilities in Japan and the United States, and also has manufacturing facilities in Thailand, China and Mexico.

Who makes Walbro carburetor?

TI Automotive purchased Walbro’s automotive fuel pump division in approx yr2000, and is the actual manufacturer of all Walbro branded automotive fuel pumps and fuel delivery modules.

Where is the model number on a Mikuni carb?

It’s simple to identify a Mikuni Carburetor by looking at the top view of the float chamber cover, the cover gasket of the float chamber or the jet chamber cover gasket. The word Mikuni ought to be printed somewhere on the carburetor. It could be in small or large letters.

Where is the model number on a quadrajet carb?

ID numbers for a Rochester Quadrajet carburetor are found next to the throttle level. There should be a metal disc affixed to the carburetor for those in the 1965 to 1968 range, and the number was stamped into the unit without a metal disc on the later-year models. This is the number you need for decoding.

How do you clean a Walbro carburetor?

The first step is to remove the carburetor from the engine and place it in a container to catch the excess gas. Next, carefully disassemble the carburetor parts, taking notes and photos to aid in reassembly. Then, liberally spray the individual parts with Walbro’s new carburetor and fuel system cleaner.

How do I identify my Zama carburetor?

On a Zama carburetor there are 2 sets of numbers that need to be acquired that are located on BOTH sides of the carburetor. For example on one side you may see C1U,C1Q,or C1M while on the other side you may K23, S118 or EL35 respectively. The actual Zama carburetor number would be C1U-K23, C1Q-S118 and C1M-EL35.

What is a 4150 style carburetor?

The 4150 carburetor was first introduced for the 1957-58 Ford Thunderbird. … Often referred to simply as the “double pumper,” the 4150 and 4150-style carburetors fuel-feed inlets and a second full metering block on the secondary side, giving it dual accelerator pumps.

How do I identify my Rochester 2 barrel?

All Rochester carburetors are identified by a seven- or eight-digit part number. The earliest units, made before mid-1968, had a triangular metal tag attached to the fuel bowl. The seven-digit part number is listed on the tag. You occasionally find original carburetors with an anodized tag of various colors.

What size is a Quadrajet carburetor?

Two basic sizes of Quadrajet were produced over the years; 750 and 800 CFM versions.

What is a Rochester carburetor?

The Quadrajet is a four barrel carburetor, made by the Rochester Products Division of General Motors. Its first application was the new-for-1965 Chevy 396ci engine.

Are Rochester Quadrajet carburetors any good?

A lot of good and bad has been written about the use of a Rochester Quadrajet carburetor as a replacement four-barrel. Some enthusiasts love them while others avoid them like the plague. The truth is, a properly tuned Quadrajet can be just as efficient and reliable as a bolt-on substitute performance carburetor.

What size Mikuni carb do I have?

Re: Identifying Mikuni carb size? Measure the inside diameter of the carb on the engine side. That will give you the size. Most of the internals will be marked as to what size they are and a lot of them can be ordered separately as needed.

How do you measure a dirt bike carburetor?

The size of the carb is measured by the diameter of the main bore of the carb itself, not the size of the air filter that it takes.

Is Walbro 255 Universal?

Universal – Non Vehicle Specific.

How much horsepower can a Walbro 450 support?

Walbro 450 High Pressure The 450 (F90000267) and 450 High Pressure (F90000274) will both Support 500+hp on E85 Fuel and 700+ on pump gas applications.

How much is a high pressure fuel pump?

The average cost for a fuel pump replacement is between $220 and $1,062 depending on vehicle and age. Labor costs are estimated between $124 and $260, while parts are priced between $95 and $854. Estimates do not include taxes and fees.

What is the H and L on a carburetor?

They are typically labeled L (low speed jet), H (high speed jet), and I (idler jet).

How do I know if my carburetor is rich or lean?

Q: How Do You Tell if a Carburetor Is Rich or Lean? A: One way to tell for sure is by “reading” the spark plugs. If the plug tip is white, the mixture is lean. If it’s brown or black, it’s rich.

How do you adjust the idle on a Walbro carburetor?

1. Open the fuel adjustment screws in a counterclockwise direction one and three-quarter turns to two full turns. This is the starting point for all Walbro fuel screw adjustments.
2. Start the two-cycle engine. …
3. Allow the engine to return to an idle operation by releasing the throttle.

How do you know when you need to change your fuel pump?

1. Engine Stuttering. One of the clearest indications that your vehicle’s fuel pump isn’t working as it should is an engine jolts and stutters while you drive at a steady speed. …
2. Engine Surges. …
3. Reduced Fuel Efficiency. …
4. High-Pitched Noises. …
5. Engine Won’t Start.